Wheel offset with 35" tires

[Liram]

Hello, been lurking at this forum for a bit but this is my first post. I drive a 2012 ram 1500. I am running bilstein 5100 up front set at 2.8 and fabtech 2" spacer in the rear. I currently have 20/9 wheels with a +18mm offset running 35/12.50/20 tires. I have a 1/4" spacer installed. I want to replace my rims with a 20/9 0 offset. I searched the forums but can't find a full answer if it will fit without rubbing. If I missed the answers in the search I apologize in advance. Thanks for any help that could be given.

 

[BiGMERF]

im running bilstein at 2.1, 20x9 0 offset with 33x12.5 and 1.75 bora spacers

a lot of people here run 2.8 and 35's... tons of threads

 

[dan1911]

Hello, been lurking at this forum for a bit but this is my first post. I drive a 2012 ram 1500. I am running bilstein 5100 up front set at 2.8 and fabtech 2" spacer in the rear. I currently have 20/9 wheels with a +18mm offset running 35/12.50/20 tires. I have a 1/4" spacer installed. I want to replace my rims with a 20/9 0 offset. I searched the forums but can't find a full answer if it will fit without rubbing. If I missed the answers in the search I apologize in advance. Thanks for any help that could be given.

http://www.ramforum.com/f41/1_wheel_spacers-105947/

This is a link to where another fella had a similar question and I gave him a reference point. I have a 2013 1500 but with the 17inch wheels with a zero offset running 34x11.50 AT2 extremes. Read through that thread and hopefully it'll you can get an idea, but I do believe you should be ok as far as rubbing goes since you have the Bils at 2.8

 

[dan1911]

http://www.ramforum.com/f41/1_wheel_spacers-105947/