will 22x10 rub?

[brianw0048]

I found a set of 22x10 SRT wheels with 305/45 tires. My truck is a stock 2016 CC short bed 4x4. Would they give me any issues? I can’t seem to find a definite answer.

 

[KyleH12]

Should be fine. I runn 305/45/22 on 22x10s with a 2/4 drop with no issues

Sent from my SM-G975U using Tapatalk

 

[Gator57]

I’m on 305/55R20’s at stock height and no where close to rubbing.

 

[mtnrider]

I don't have a 1500 so I don't have a fit answer for you BUT there is more to fitting wheels/tires then just the size. Offset of the wheel plays a big part in what will fit (and not rub) or not.
Now it doesn't sound like those tires aren't that much bigger then stock though so may be a non issue


,

 

[CoreySinger]

They fit. Barely. Real close to rubbing the upper a arm on the sidewall

 

[MCMLXIX]

They fit. Barely. Real close to rubbing the upper a arm on the sidewallView attachment 205010 View attachment 205011

Corey,
Do you know what the offset is for those wheels?

I am looking at a 22x10 with an ET20 for a RAM R/T that came with 22x9 with ET19
that gives me 14mm less on the inside (closer to the knuckle/arm) and pushes the edge of the wheel out by 12mm …

 

[BobSacomano]

I found a set of 22x10 SRT wheels with 305/45 tires. My truck is a stock 2016 CC short bed 4x4. Would they give me any issues? I can’t seem to find a definite answer.

I'm running 22x12, 305/45R22 -44 offset on a stock suspension 2015 Ram 1500 Express 4x4 and I have only a slight rub at full turn. You should be good. Go here and plug in your info to be sure.

 

[heefageLA]

These are 22x10 "Hellcat" wheels from OE. I had to run a 1/4" spacer for the front tires not to rub the A-arms. I can barely squeeze my finger between the tire and A-arm.

Says they have 6.48 backspacing... https://www.oewheelsllc.com/22-Fits-Dodge-Ram-Wheel-Replica-Hyper-Black-22x10-SET

 

[brianw0048]

Just for the record, I bought the wheels. And I do rub the sway bar at full lock.

 

[WhiteNBlackRam]

I have 22x10 on 305/45 and no where close to rubbing.

 

[hdoggie24]

Im assuming the higher offset wheels will cause rubbing. What offset are is everybody running?

 

[H1Chester]

22x10 SRT Reps 305/40 very very slight rub at full lock. Belltech 2/4 drop.