BossHogg
- Posts
- 1,940
- Reaction score
- 2,471
Latest activity Postings About
-
-
DEF is DEF is DEF as long as it meets the appropriate ASTM or EU specs. The most important thing is getting it fresh and stored indoors. -
It's interesting to me that Mopar trans are so hated, yet the only failures I have had were a Ford auto in an Expedition @13K miles, and...
-
Good luck. As I said before... there is nothing wrong with the 68RFE if you use it as intended. It's built to tow. Use it, maintain...
-
If you get a 2008+ 2500 with the Cummins you'll get the 68RFE. You'll get a few naysayers with it, but typically when you see a major...
-
BossHogg replied to the thread 2024 Ram 1500 High RPM's on highway at low speed.Some quick math indicates your transmission may be in 7th gear if your axel ratios are 3:92s and in 6th gear if your axel ratio is...
-
It looks like BossHogg called it, the Auto-High beam alignment with AlfaOBD is the likely cause. You may want to exercise more caution...
-
1500's don't have the hidden grease fitting,only 2500's and heavier have it
-
BossHogg replied to the thread What the heck is this?.Have you recently had your windshield replaced? When I had a windshield replaced in my 2013 Laramie, the installer told me the flashing...
-
BossHogg replied to the thread My pretty bad 2018 RAM 1500 Hemi experience, help/advice needed on what to do next.If it were me, yes, honor the warranty but in a timely manner. It appears they are honoring the warranty but waiting the time was...
-
BossHogg replied to the thread 2024 Limited with Alpine System - What to do Next?.Looks like the only test not mentioned is comparing your 2024 to another 2024 with the same trim. I assume that would have been done if...
-
-
This is a bigger reason for concern over a GHB failure... people "know someone" who had it happen or read about it in a thread online...
-
BossHogg replied to the thread Cummins Killer Bolt..I guess anything is possible but in all the years the grid heater bolt of death has been discussed, I've never read the turbo has been...
-
Just to add into the pile. I know someone personally who lost their Motor due to this Bolt. Took out Motor, Turbo and all. Truck was...
-
The stock entrance can handle enough airflow to support ~600HP which is far above what 99.99% of the people are running so there...
-
-
Loading…
-
Loading…
