Jammer24
Junior Member
So I jumped on the wagon with alfaOBD and the mx+ on android. I attempted to program a new fob and it asked for the four digit pin. So I called the dealer and they told me they couldn't give it to me. Had to take my truck to them and pay them to do it. I was able to change tire size and TPMS thresholds with my autel ms906 with no issue. So i was able to go into the alfaobd and find a four digit pin. However when I tried that pin it didn't work. It said the key needed to be in the lock position. I would guess that the key just needed to be inserted in the position allowing you to pull the key out.....The one message said that I only had three attempts and something would be locked. second attempt was the same only i put the key in the run position. at this point I backed out and are looking to the pro's
Also I read the page or pages for setup of alfaobd and found I didn't have to do any of the settings it was showing in the setup instructions.
Also I read the page or pages for setup of alfaobd and found I didn't have to do any of the settings it was showing in the setup instructions.