Any idea how to bench test the sensor to see if it is good?
I may try another sensor bc I noticed the baggie the sensor came in was sliced open and taped over. Makes me wonder if someone put a bad one back in the bag and resold it. Or maybe put a cheapo one in a Mopar bag and sold it. People...
Ok I was finally able to change the pressure transducer sensor today and P0934 went away. However, it was immediately replaced by P0869 Transmission Fluid Pressure High. I had P0868 before P0934, but it went away when I discovered the fluid was overfilled and set it to correct level. Dunno what...
I extracted 3 more qts and refilled yesterday. Up to 13 qts now. I have 3 more quarts of new fluid. P0934 came back too. I’m going to change the pressure sensor now. Probably do next week. I’ll update.
Thanks for the info. I figured it would mix quick but had no idea.
So I pulled 3 more qts out yesterday then refilled w/ 3 qts. I drove about 5 miles to dealer to get a pressure sensor so I could swap it out. When I started up truck at dealer, the CEL P0934 was gone. I drove about 250 miles...
I just dropped the pan and replaced the filters on a 16 2500 5.7 4x4 187k. Old fluid pretty dark. I would like to get as much of that old fluid out. How many miles until I drain and refill? I have a fluid extractor that goes down the dip stick that makes it super easy. My truck is shifting...
So I bought a used 2016 2500 5.7 for my work truck. Threw a P0868 before I got home from dealer. LOL. Anyway after researching a bit I finally got around to figuring it out today. First thing I did was check fluid level. I got the tranny up to temp running some errands then came home, parked it...
Update. I was able to work on truck this morning. Amazingly both low beam bulbs were burned out. So replaced those and everything works. The rear taillight had some corrosion in the connector for lights. Sanded down the contacts and a little contact cleaner plus some dielectric grease and now...
Thanks for the response. I found a bunch of threads on the exact opposite of what my problem is, but only 1 with my issue. Nobody ever responded to the poor fellow.
I literally brought my tools and crawled under truck inspecting it Saturday before I bought it. Checked U Joints etc, looked for...
I just bought this Ram 2500 yesterday. This morning I was leaving to go fishing and the headlights would not come on. The high beam/brights worked fine though so I just used that. Passenger taillight completely out as well. This is my first Dodge/Ram vehicle ever so I wondering if this is a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.