crazykid1994
Senior Member
Here y’all go. If anyone is interested feel free to message me
Fan ramp up 15% to 100%
Fan ramp up 15% to 100%
Attachments
Last edited:
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
She's a heavy one... Nice squat. At least it has a reason..Ole Bessy had to put in some work yesterday. Picked up a new boat trailer for my father and went and swapped the boat over to the new trailer. 7400lb boat loaded. Not sure of the trailer weight. The trailer itself squatted the rear of my truck almost an inch. She pulled the boat up the ramp no issues though and made it the 30 minute ride home. Was a great test for that new fan I installed. Engine temp hovered around 195-199° most of the trip. Oil temp plateaued at 210°. Trans hovered between 156-160°. My new shocks had no issue with the extra weight either and the truck handled very well given the circumstances.
Edit: just found out the trailer is 1900lbs. So 9300lbs total. Gosh dang.
Last time was a bad wheel speed sensor. Passenger front. It went away for a minute or two halfway into the trip then came back. I’ll have to hook up the scanner when I get the chanceHopefully just something simple like the controller...
Sounds like a wheel bearing then.
Good news and bad news. The EBS code was c0051 which is steering wheel position sensor and I have an EPS code as well U0415 implausible data received from abs. So whatever appears to be messing up my alignment may be causing some wacky computer readings. It’s too hot to jack the truck up right now so I’ll get to it later in the week later at night. How can I read steering wheel angle through the computer.Rack wouldn't affect camber though.