-
-
The contacts in the wiper motor need to be cleaned. When you do it, remember to have diaelectric grease handy to coat them with after... -
mrack replied to the thread Bilstein 5100 vs 6112.If your lower strut bolt is seized then the lower control arm to frame bolts will definitely be seized as well. They need to be free to...
-
mrack replied to the thread Aluminum tailgate.Only 5th gen 1500s are aluminum. I thought it was dumb when I first hear about it, but man is it nice how light it is opening and...
-
mrack replied to the thread Daystar 1” front leveling kit.Then you really can’t afford the $3000 bill when your entire front end is destroyed because of the cheap spacers. If you do it...
-
mrack replied to the thread 2012 ram stalling and wont stay running.Pull the valve covers and check for a broken valve spring, then turn the motor over and make sure all the rocker arms are moving...
-
mrack replied to the thread Garage clean out, 4th gen 1500.Interested in the radio bezel for $75, what would shipping cost to 49251? Or I’m only about 2 hours away from Toledo, if you ever...
-
mrack replied to the thread Custom overhead aux switches, Ford style.So I had attempted to 3D design and print the entire part instead of just a one-off modification, but ran into issues printing the...
-
-
Why do you care? Trust the dozens of threads proving that these spacers have no place on the half ton ram trucks. You dont want them.
-
mrack replied to the thread Grill Paint.Get your paint code in a rattle can, do your research and prep properly, then use spray max 2k clear. Trying to use cheaper paints will...
-
Not really a new member, just couldn't get any help to re-connect to my old account since I retired. My old email was associated with my...
-
mrack replied to the thread Daystar 1” front leveling kit.Don’t use pucks. Bilsteins, eibach, or fox are the way to go
-
mrack replied to the thread Fog Lights.If your truck is gas, you can put a light bar in between the tow hooks. Diesel trucks the inter cooler is in the way I think I’ve heard...
-
mrack reacted to Stevearino's post in the thread 2018 Ram 1500 Express 2WD RCSB adding rear sway bar with
Like.
Thanks everyone! I'm planning to do the Hellwig sway bar, and I just found the end links and hardware needed through a dealer I can get... -
mrack replied to the thread 2018 Ram 1500 Express 2WD RCSB adding rear sway bar.Hellwig has 2 kits, 1 includes adjustable end links and the other has no end links. I’d get the Hellwig end links over the stock ones...
-
mrack replied to the thread 2018 Ram 1500 Express 2WD RCSB adding rear sway bar.Get the Hellwig kit, it comes with everything you need. Or if you do go with the stock sway bar, I still have the stock brackets and...
-
-
Loading…
-
Loading…
