- Joined
- Sep 3, 2012
- Posts
- 1,060
- Reaction score
- 78
- Ram Year
- 2012
- Engine
- hemi 5.7
again like on my other two threads sharing this with you also
how we doing everyone new to the forum, have owned ram1500 since i was 15, i just purchased a 2012 ram 1500 quad cab 4x4 have a pretty good idea of the direction that i want to go with it, i have listed everything that i have done and parts that i have ordered and what i am looking for guidance on any suggestion would be well appreciated.
MODS THAT ARE DONE
blacked out back glass, legal limit on front, blacked out eyebrow(done by vision audio)
spray in linex liner done by (done by truck works)
factory running boards removed
jvc arsenal single din receiver and dash kit installed
MODS AND PARTS ORDERED AND TO BE DONE
AIRAID MXP Series Synthaflow Cold Air Dam Intake System (will be delivered 9-18-12) will install myself
badge removal, door handle removal, door poppers, remote start, and back up camera scheduled for install on 10-3-12 at vision audio.
borla cat back dual exhaust, mbrp 5in black tip, jba shorty headers, and AIRAID PowerAid Throttle Body Spacer expected delivery 10-2-12 will install myself
Bedlocker Explorer Series Tonneau Cover Kit, pro comp 6 inch Lift Kit with MX-6 Shocks, whell spacers expected delivery 10-4-12 will install myself
anzo smoked headlights, tail lights, and third break light expected delivery 9-19-12 will install myself.
jl audio hd900/6 amp, 4 ct-650 6x9's and 10w3v3-2 stealth box
thanks everyone.
day i picked it up at the dealer ship
blacked out back glass, legal limit on front, eyebrow blacked out 3.5 inches below asi line
linex bed liner bed is kinda dirty had to haul some wood chips havent sprayed them all out yet
factory running boards removed (I HATE CHROME!!!) they had to go
airade coa fresh out of the box
cold air intake installed in truck
then i did a 0-50 run with camera insade cab with windows up to here the difference between stock and not stock, i still have stock exaust but here is a link to the video.
20120918_134247.mp4 - YouTube
i will be uploading more pics when i get done with the badge removal, i almost have all the adhesive off then all i have to do is buff it back out wash the truck and take more pics then upload. thanks for following my build process everyone.
New video up on the youtube guys, did this one today up hill on the on ramp like 20-70mph heres the link , will upload more picks of badge removal soon house flooded last night busted water pipe so gotta wash the truck before i take and upload picks.
https://www.youtube.com/watch?v=vZ4BBTzbTzU&feature=youtube_gdata_player
my badge removal compete, (yes i know truck is dirty everywhere except badge removal car wash was being repaired today and im lazy no hand washing for me lol)
NEW PARTS NEW PARTS NEW PARTS YAAAAAAAAA!!!
ok i found some tape and paper getting my plasti dip on this morning(****** the girlfriend off cause im up working on it to "early" and woke her up and made her come look lol.
PREP
1ST COAT
2ND COAT
I know doest look super nice its just cuase the morning sun is hitting it funny when i get the last coat on ill turn the truck around and take a better pic
LAST COAT AND COMPLETED i know i still have to remove the tape sticky ill do that when i get back from taking my son out for the day then later today i will do the front and upload pics.
Base Kit k2082B
Front shocks Procomp ProRunner adjustable zx-20014 set to 2.75
no preload strut spacer in the front.
in the back i am going to run
coils from 6in RCX lift
1.5in performance accessories rear coil spacer
procomp prorunner zx20001 rear shocks.
I am also using a 1.5in hub centric wheel spacer to allow me to run my factory wheels untill my new wheels and tires get here.
After my wheels and tires get here and installed i am going to have a 3in performance accessories body lift with gap gaurds installed.
Before Pics
wheels are XD778 Monster
tires are going to be nitto 37x12.5(still deciding on dunes or terra grapplers
Front
Rear
Wheels
i have also posted the lift in the suspension section to gram some more attention maybe and get some more oppionons and thoughts
THANKS EVERYONE WHO HAS HELPED ME IN MAKING DECISIONS
ok everyone so here are the pics, i must clean the truck but here they are just got home with it
front
back
driver side
passenger side
front tape before
front tape after
back tape before
back tape after
how we doing everyone new to the forum, have owned ram1500 since i was 15, i just purchased a 2012 ram 1500 quad cab 4x4 have a pretty good idea of the direction that i want to go with it, i have listed everything that i have done and parts that i have ordered and what i am looking for guidance on any suggestion would be well appreciated.
MODS THAT ARE DONE
blacked out back glass, legal limit on front, blacked out eyebrow(done by vision audio)
spray in linex liner done by (done by truck works)
factory running boards removed
jvc arsenal single din receiver and dash kit installed
MODS AND PARTS ORDERED AND TO BE DONE
AIRAID MXP Series Synthaflow Cold Air Dam Intake System (will be delivered 9-18-12) will install myself
badge removal, door handle removal, door poppers, remote start, and back up camera scheduled for install on 10-3-12 at vision audio.
borla cat back dual exhaust, mbrp 5in black tip, jba shorty headers, and AIRAID PowerAid Throttle Body Spacer expected delivery 10-2-12 will install myself
Bedlocker Explorer Series Tonneau Cover Kit, pro comp 6 inch Lift Kit with MX-6 Shocks, whell spacers expected delivery 10-4-12 will install myself
anzo smoked headlights, tail lights, and third break light expected delivery 9-19-12 will install myself.
jl audio hd900/6 amp, 4 ct-650 6x9's and 10w3v3-2 stealth box
thanks everyone.
day i picked it up at the dealer ship
blacked out back glass, legal limit on front, eyebrow blacked out 3.5 inches below asi line
linex bed liner bed is kinda dirty had to haul some wood chips havent sprayed them all out yet
factory running boards removed (I HATE CHROME!!!) they had to go
airade coa fresh out of the box
cold air intake installed in truck
then i did a 0-50 run with camera insade cab with windows up to here the difference between stock and not stock, i still have stock exaust but here is a link to the video.
20120918_134247.mp4 - YouTube
i will be uploading more pics when i get done with the badge removal, i almost have all the adhesive off then all i have to do is buff it back out wash the truck and take more pics then upload. thanks for following my build process everyone.
New video up on the youtube guys, did this one today up hill on the on ramp like 20-70mph heres the link , will upload more picks of badge removal soon house flooded last night busted water pipe so gotta wash the truck before i take and upload picks.
https://www.youtube.com/watch?v=vZ4BBTzbTzU&feature=youtube_gdata_player
my badge removal compete, (yes i know truck is dirty everywhere except badge removal car wash was being repaired today and im lazy no hand washing for me lol)
NEW PARTS NEW PARTS NEW PARTS YAAAAAAAAA!!!
ok i found some tape and paper getting my plasti dip on this morning(****** the girlfriend off cause im up working on it to "early" and woke her up and made her come look lol.
PREP
1ST COAT
2ND COAT
I know doest look super nice its just cuase the morning sun is hitting it funny when i get the last coat on ill turn the truck around and take a better pic
LAST COAT AND COMPLETED i know i still have to remove the tape sticky ill do that when i get back from taking my son out for the day then later today i will do the front and upload pics.
Base Kit k2082B
Front shocks Procomp ProRunner adjustable zx-20014 set to 2.75
no preload strut spacer in the front.
in the back i am going to run
coils from 6in RCX lift
1.5in performance accessories rear coil spacer
procomp prorunner zx20001 rear shocks.
I am also using a 1.5in hub centric wheel spacer to allow me to run my factory wheels untill my new wheels and tires get here.
After my wheels and tires get here and installed i am going to have a 3in performance accessories body lift with gap gaurds installed.
Before Pics
wheels are XD778 Monster
tires are going to be nitto 37x12.5(still deciding on dunes or terra grapplers
Front
Rear
Wheels
i have also posted the lift in the suspension section to gram some more attention maybe and get some more oppionons and thoughts
THANKS EVERYONE WHO HAS HELPED ME IN MAKING DECISIONS
ok everyone so here are the pics, i must clean the truck but here they are just got home with it
front
back
driver side
passenger side
front tape before
front tape after
back tape before
back tape after