Want to add: 5" exhaust tips

Pull Ya · Apr 21, 2016

Adam,
I have a 22" Magnaflow and when I put the 5" tips on I found that the sound of the muffler changed and was alot lower sounding rumble and the "bark" was gone. I think it sound a lot better now.
Jay

BlownGP · Apr 21, 2016

PassivAggressor said:
You still have the option to move them around or did you cut that off?

Not sure what you mean buddy?

CMil527 · Apr 21, 2016

Moe's for sure!

SitKneelBend · Apr 21, 2016

BlownGP said:
Not sure what you mean buddy?

The portion where it clamps on to the tailpipe is rounded so it can slide around like a ball and socket joint. He' asking if you had to remove the ball portion on the factory tailpipe to fit these tips and if so how's it adjusted to center properly.

Sent from my HTC One M9 using Tapatalk

PassivAggressor · Apr 21, 2016

SitKneelBend said:
The portion where it clamps on to the tailpipe is rounded so it can slide around like a ball and socket joint. He' asking if you had to remove the ball portion on the factory tailpipe to fit these tips and if so how's it adjusted to center properly.

Sent from my HTC One M9 using Tapatalk

Yes that.

Sent from my VS990 using Tapatalk

Drummin4jc · Apr 21, 2016

Pull Ya said:
Adam,
I have a 22" Magnaflow and when I put the 5" tips on I found that the sound of the muffler changed and was alot lower sounding rumble and the "bark" was gone. I think it sound a lot better now.
Jay

Jay,

Thank you for the info on the sound of the tips. I appreciate it!

Adam

Booms · Apr 22, 2016

Moes 5" tips FTW !! :Big Laugh:

Csanders1992 · Apr 22, 2016

It's always about who has the biggest tip

Sent from my iPhone using Tapatalk

BlownGP · Apr 22, 2016

SitKneelBend said:
The portion where it clamps on to the tailpipe is rounded so it can slide around like a ball and socket joint. He' asking if you had to remove the ball portion on the factory tailpipe to fit these tips and if so how's it adjusted to center properly.

Sent from my HTC One M9 using Tapatalk

Oh, My truck didn't have stock tips or exhaust when I bought it.
The old tips were cut off to a length the new tips would look fine.

So that's why I have no idea what he meant. Never seen the stock tips. lol

Drummin4jc · Apr 22, 2016

Booms said:
Moes 5" tips FTW !!

Lookin good! I'm going to pull the trigger on them soon. Have a few Spring projects to do first and then I'll get the tips on the way. :happy107:

Adam

PassivAggressor · Apr 22, 2016

BlownGP said:
Oh, My truck didn't have stock tips or exhaust when I bought it.
The old tips were cut off to a length the new tips would look fine.

So that's why I have no idea what he meant. Never seen the stock tips. lol

Yah I want to keep that ball socket thing so I can always adjust my tips if I need. Unless I can find tips short enough and can just weld them on before that.

RJP · Apr 22, 2016

I had a stock system so I went with the Magnaflow Catback system #15363 from Moe's. Really like the tome and love the 5" black tips.

Magnaflow Catback Exhaust 2009-2016 Dodge Ram 1500 Dual Rear Exit catback exhaust with 22" muffler and dual 5" Black stainless steel tips

THETANK · Apr 22, 2016

my 5" tips came with the Magnaflow cat back, I can't imagine the tips costing 1/4 of the exhaust price.

blackbetty14 · Apr 22, 2016

Here's mine. I custom made them 5" double wall stainless and then burnt the tips. These I made to fit my dynomax cat back that has 2.5" dual exhaust.

TestPilot57 · Apr 23, 2016

Hemi450hp said:
Adam, those are the right ones. Just a heads up, but we sold our last set on Tuesday, and should have more ready to ship next week.

That must have been my order

I love them.

Easy, easy bolt-on. The only thing that made mine not "just" bolt-on is that the factory clamps were spot welded to the tip, so I had to cut them off (the new tips didn't come with clamps). All in all, a 20 minute job.

As others have said, and you can see for yourself, they look like that's what the factory should have done.

I notice a definite change in sound. A very little bit louder, but more notably, it's a deeper more hollow tone. You can tell why just in handling them - they resonate every little sound.

:happy107:

Jameson · Apr 23, 2016

Can the bolt on ones from Moes be adjusted for a small body lift like stock ones can?

Hemi450hp · Apr 23, 2016

Jameson said:
Can the bolt on ones from Moes be adjusted for a small body lift like stock ones can?

Yes because they use the exact same ball/socket connection as the stock tips.

Drummin4jc · Apr 23, 2016

TestPilot57 said:
That must have been my order

I love them.

Easy, easy bolt-on. The only thing that made mine not "just" bolt-on is that the factory clamps were spot welded to the tip, so I had to cut them off (the new tips didn't come with clamps). All in all, a 20 minute job.

As others have said, and you can see for yourself, they look like that's what the factory should have done.

I notice a definite change in sound. A very little bit louder, but more notably, it's a deeper more hollow tone. You can tell why just in handling them - they resonate every little sound.

Thanks for that information! As you can see, I definitely have a void to fill with the body lift on top of the suspension lift:

Adam

BlownGP · Apr 23, 2016

Drummin4jc said:
Thanks for that information! As you can see, I definitely have a void to fill with the body lift on top of the suspension lift:

Adam

That looks horrible. hahahaha :naughty:

Drummin4jc · Apr 23, 2016

BlownGP said:
That looks horrible. hahahaha

Lol!!

Tell me what you really think, Blown! Haha!

Adam

Want to add: 5" exhaust tips

U.S. MARINE VETERAN

Senior Member

Senior Member

Senior Member

Senior Member

WWG1WGA!

The OG

Attachments

Senior Member

Senior Member

WWG1WGA!

Senior Member

Member

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Moe's Performance

WWG1WGA!

Senior Member

WWG1WGA!

Similar threads

Forum statistics

Share this page