PCM Part# & Gear's question?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Darkflow

Senior Member
Joined
Oct 1, 2012
Posts
427
Reaction score
125
Location
Odessa, TX
Ram Year
2010
Engine
Hemi 5.7
Im ready to order the DiabloSport Trinity from HemiFever.

So my questions are,

1. How do i tell what gear's my truck has?
2. Is the PCM Part# start with a P?

There's nothing on the box but there is a tag on a set of wires next to it. Im guessing that would probably be it.
 

TheSatinPumpkin

Senior Member
Joined
Mar 7, 2011
Posts
3,280
Reaction score
272
Location
Robles Junction/Three Points AZ
Ram Year
2004 Dodge Ram
Engine
5.7L
You can request your build sheet from the dealership or Chrysler customer care. That will tell you the factory gears installed at assembly. Sean should be able to point you to the PCM Number on the module.
 
Last edited:
OP
OP
Darkflow

Darkflow

Senior Member
Joined
Oct 1, 2012
Posts
427
Reaction score
125
Location
Odessa, TX
Ram Year
2010
Engine
Hemi 5.7
Dang, i was hoping to atleast get it ordered by tonight. I just requested the build sheet for the truck.

As far as HemiFever goes, how quick does he ship after he's set the tunes?
 

TXKID

Senior Member
Joined
Apr 17, 2012
Posts
900
Reaction score
94
Location
Houston, TX
Ram Year
2012
Engine
Hemi 5.7
PCM Part# & Gear's question?

The gear ratio with be printed on a sticker on the front transfer case if you have a 4x4 or near the rear axle. Just climb under there and you should be able to spot it
 

craigsez

Senior Member
Joined
Aug 24, 2012
Posts
1,063
Reaction score
376
Location
Novascotia,Canada
Ram Year
2016
Engine
5.7
You can also go to a dodge dealer and give them your vin and they can give you a copy in a cpl minutes....
I needed my ecu # as well but its recorded into my trinity shortly after i plugged it in the 1st time..
 
Top