Am I rich enough now?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cheapbeater

Senior Member
Joined
Jun 27, 2010
Posts
453
Reaction score
6
Location
Wisconsin
Ram Year
2012
Engine
Hemi
As you guys know, I have pacesetter LT's, homebrew CAI, and SC 3815 91 tune.
I just put in a 180* t-stat and will do a powerwire sometime... the powerwire doesnt do anything in the winter anyway, right?
Do you guys think i will be rich enough with these mods? I'm waiting till christmas to get an interceptor gauge so i have no way of telling a/f yet..
it smells rich at idle... :********:

thanks
 
Joined
Jun 28, 2010
Posts
3,085
Reaction score
3
Ram Year
2004
Engine
5.7
You'll be fine. I had that same setup prior to my cam and the a/f was dead on with LTFT's very close to 0.
 
OP
OP
cheapbeater

cheapbeater

Senior Member
Joined
Jun 27, 2010
Posts
453
Reaction score
6
Location
Wisconsin
Ram Year
2012
Engine
Hemi
was i supposed to drill a little hole in the t-stat? the stocker had one with a little plunger in it. I got the same t-stat as you teach.. had to shave a mm off it.

also, pretty sure my stocker was stuck open..
 
Joined
Jun 28, 2010
Posts
3,085
Reaction score
3
Ram Year
2004
Engine
5.7
was i supposed to drill a little hole in the t-stat? the stocker had one with a little plunger in it. I got the same t-stat as you teach.. had to shave a mm off it.

also, pretty sure my stocker was stuck open..

I drilled a weep hole in the new one since it doesn't have one already in it.
 
OP
OP
cheapbeater

cheapbeater

Senior Member
Joined
Jun 27, 2010
Posts
453
Reaction score
6
Location
Wisconsin
Ram Year
2012
Engine
Hemi
ok. damnit, i suppose i should do it before i dump that expensive a$$$ hoat antifreeze in there
 

truckin151

Supporting Member
Joined
Jun 29, 2010
Posts
5,712
Reaction score
254
Location
Arizona
Ram Year
2013 sport
Engine
5.7
What kind of Tstat did you get? if it was a Jet it already has the hole in there
 
OP
OP
cheapbeater

cheapbeater

Senior Member
Joined
Jun 27, 2010
Posts
453
Reaction score
6
Location
Wisconsin
Ram Year
2012
Engine
Hemi
yup. stant because i am cheap...
does it matter that the round plate on the end of the shaft is a little smaller than the stocker?
 
Top