Wiring help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HemiPower36

Senior Member
Joined
May 16, 2014
Posts
1,424
Reaction score
839
Location
CA
Ram Year
2014 Ram 1500 Laramie 4x4 3.92 8-speed
Engine
hemi 5.7
I have a question for the wiring experts.
I bought some rigid duallys. I wired them up and they do not turn on. This is not my first set of light I have wired. I am absolutely eff'in lost.

Look at the diagram below and you will see just how easy of an instal these lights are.

6e9949d9c4b013f1f9b19322aae8ea31.jpg

Again, won't turn on. Suggestions please. I am losing my mind. Thanks.


Sent from my iPhone using Tapatalk
 

muscleram

Member
Joined
May 22, 2017
Posts
69
Reaction score
18
Ram Year
2015
Engine
hemi 5.7
Start at the lights check for power and ground. Flip the switch see what happens. If you got nothing go back to the switch and check for power and ground. Also check the fuse even if it looks fine check it with a test light

Sent from my SM-G935W8 using Tapatalk
 

baum

Senior Member
Joined
Aug 26, 2013
Posts
1,893
Reaction score
411
Location
savage, mn
Ram Year
2015 Laramie
Engine
Hemi 5.7
I also would start at the switch take a dmm to the terminals at there and make sure you are getting the 12+, ground.
 
OP
OP
HemiPower36

HemiPower36

Senior Member
Joined
May 16, 2014
Posts
1,424
Reaction score
839
Location
CA
Ram Year
2014 Ram 1500 Laramie 4x4 3.92 8-speed
Engine
hemi 5.7
Thank you all for the feed back.


Sent from my iPhone using Tapatalk
 
OP
OP
HemiPower36

HemiPower36

Senior Member
Joined
May 16, 2014
Posts
1,424
Reaction score
839
Location
CA
Ram Year
2014 Ram 1500 Laramie 4x4 3.92 8-speed
Engine
hemi 5.7
Turns out, had a blown fuse. I think I caused it. 99.9% sure. Not a rigid defect at all. :)


Sent from my iPhone using Tapatalk
 
Top