BlownGP
Reaction score
1,696

Latest activity Postings About

    • BlownGP
      BlownGP replied to the thread dually longer wheel studs.
      These will fit a 18 1500? I can't seem to find any ARP ones. Thanks
    • BlownGP
      BlownGP reacted to Wild one's post in the thread 8hp70 heater bypass with Like Like.
      The thermostat even open isn't a full flow thermostat, Jesse's bypass basically removes the flow restriction the stock thermostat...
    • BlownGP
      BlownGP reacted to CanuckRam1313's post in the thread 8hp70 heater bypass with Like Like.
      I see up to a 30 deg/c decrease in trans temps and a 3 to 5 deg/c decrease in engine temps with @caulk04 transmission cooler bypass...
    • BlownGP
      BlownGP reacted to caulk04's post in the thread 8hp70 heater bypass with Like Like.
      I just don't have the ability to prototype anything anymore. I used to be able to do personal projects at work on my own time but that...
    • BlownGP
      BlownGP reacted to caulk04's post in the thread 8hp70 heater bypass with Like Like.
      If someone came up with a good option, I'm sure it would sell. Especially if it didn't require leveling the trans first, accounting for...
    • BlownGP
      BlownGP reacted to 04fxdwgi's post in the thread 8hp70 heater bypass with Like Like.
      Might be a great idea for one on a PPE pan. Unless one rigged a sight glass on the trans, would still need to crawl under and watch for...
    • BlownGP
      BlownGP replied to the thread Windshield / moldings ???.
      Thanks for the tips. That tool seems like a better one then the hook. I'm going to get it. I was thinking the hook tool would rip the...
    • BlownGP
      BlownGP reacted to Jeepwalker's post in the thread Windshield / moldings ??? with Like Like.
      I would wash your hands real well (remove human oils) & try to "work" the molding/s down by hand first. Esp on a warm sunny day. Might...
    • BlownGP
      BlownGP reacted to TJP440's post in the thread Windshield / moldings ??? with Like Like.
      The thick hook tool is a cotter key removal tool. While he was successful in using it i would strongly encourage the slimmer tool with...
    • BlownGP
      BlownGP replied to the thread Windshield / moldings ???.
      Yeah, so those too. Probably wouldn't last long anyways. Funny, you mentioned getting some from the junkyard. I bought some from a...
    • BlownGP
      BlownGP replied to the thread Windshield / moldings ???.
      Bringing this back up. Anybody know the part numbers for the OEM moldings? There's some aftermarket ones on ebay, but I doubt they fit...
  • Loading…
  • Loading…
Back
Top