Recent content by Athlium
-
Adding Remote Keyless Entry (keyfob lock/unlock) DIY w/ ALFA
do you have the bypass cable?? Alfa doesn't support pulling 5 digit code.. but JScan might.. reading further on other groups.. JScan might not support 1500 models.. just so you know. also, try calling another dealership or maybe even a decent ACE hardware.. some should be able to program it...- Athlium
- Post #44
- Forum: 4th Gen DIY
-
Adding Remote Keyless Entry (keyfob lock/unlock) DIY w/ ALFA
wow.. I still can't believe that they sell a truck without RKE in 2023.. follow Mpgrimm2's directions.. he'll set you straight. I hope you have been able to work this out.- Athlium
- Post #41
- Forum: 4th Gen DIY
-
UAQ /UAS , Better yet, Uconnect in general with USB C ports :)
not sure.. I don't even know what happened other than that only 1 usb C and 1 usb A port works for AA.. I don't have 110..- Athlium
- Post #41
- Forum: Audio & Electronics
-
UAQ /UAS , Better yet, Uconnect in general with USB C ports :)
Thank @deathbyburito for his time to design this faceplate- Athlium
- Post #38
- Forum: Audio & Electronics
-
Adding Remote Keyless Entry (keyfob lock/unlock) DIY w/ ALFA
My 2018 has factory back up camera but no harness/actuator for power lock on tailgate. I'm searching for one...- Athlium
- Post #36
- Forum: 4th Gen DIY
-
Free for pickup - 2018 crew cab interior door panels
Full set 2018 Oem 1500 crew cab interior tradesman door panels in black. Sat out in PNW weather for about a year. Will need some cleaning. Pick up in 98407 only. -
USB and HDMI port adapter
so, your 8.4 doesn't car play nor play tunes via thumb drive? was able to play from thumb drive using my 5in and also able to after I upgraded to 8.4. I can even use AA and CP and thumb drive with my jump seat usb hub.. the request for HDMI port adapter is confusing to me.- Athlium
- Post #2
- Forum: Audio & Electronics
-
8.4 uconnect upgrade
reach out to @Mpgrimm2 with your truck details. he'll get you squared away- Athlium
- Post #6
- Forum: 4th Gen DIY
-
Adding Remote Keyless Entry (keyfob lock/unlock) DIY w/ ALFA
Glad these instructions are working out for everyone.- Athlium
- Post #34
- Forum: 4th Gen DIY
-
12V/USB Location Swap?
If you only need usb on the driver side, I would recommend to just swap out the 12v for USB. For a clean swap, with no splice and taps, you can got with this adapter https://smile.amazon.com/dp/B08V4XFP24 then use something like https://smile.amazon.com/gp/product/B092M1XS1J Also to keep in... -
Leak in truck
I just did this. There are 4x 3/4in bolts for the seats you remove. Then lift the seats up and out as there is a latch for the seatback. 1 Trim screw for each side of the back. then it's just matter of removing old vent and installing new vent. Part number 68323649ab- Athlium
- Post #6
- Forum: General Discussions
-
End Cap for Step Bar 2018 Lone Star 1500
You might have better luck trying the salvage yards. 2 screws on the bottom for each cap. -
New 2018 1500 Tradesman EcoDiesel
01/23/2023 - replaced Cab Vent due to know leak issue. Part 68323649AB ordered from ebay. Removed rear seats and fold flats (6x 3/4in bolts) [Might consider doing the rear seat lift mod later]. removed 4 trim bolts. Limited on space due to distance between cab and cargo bed. was able to punch...- Athlium
- Post #18
- Forum: Introduction
-
Upgrading Radio from RA1 to RA4 w/o going to single zone ATC
I went the way with just trying to have steering wheel controls first.. and that was not enough. Bezel you can probably get a single zone ATC or maybe even no ATC.. but you'll probably need conversion harness to go from RA1 to RA4.- Athlium
- Post #4
- Forum: Audio & Electronics
-
Wanting to upgrade my Uconnect 3 w/5" display to a larger one
Check the for sale forums.. might get lucky there.. but you will probably need to piece it all together.. 2019+ classic 8.4 VOL / AC Bezel New harness + HVAC Steering wheel controls if you don't have and want them.- Athlium
- Post #4
- Forum: Audio & Electronics
