Has anyone bothered to change a plug and or the plug wire. Sure sounds like a wire issue. Usually when spark plug wires heat up they’d will show their faults.
Problem with doing it yourself isn’t that it costs a lot or is very hard, at least on the passenger side. Problem is the driver side. From what I’ve heard thr dip stick gets in the way so you have to unbolt it. Not a problem on the 2 wheel drive. On the 4 wheel drive the front diff mounts are in...
Got two 12” sundown SA-12 subs in a dual 12 fox box vented. It’s really loud for an under the seat box. It does pretty much everything I wanted it to do for less than $300 shipped. I wouldn’t have like less.
The sundown subs are some of the best on the market for the money and still have...
So the plug wires can cause issues to when a load shows up a spark issue will be noticeable. However it’s usually more of a miss.
I’d say it’s more of a emissions issue like stated above.
So will this fix my problem I’m having like hundreds of other people with the cruise not coming on and having to raise and lower the steering column to get it to work. That would be nice.
Can you do just a rear lsd change or do you have to do,the front too?
If you do have to do the front too does this also require a complete axle swap because of the weld?
I'm running the fox acoustics box with two 12" sundown audios and just a 1200 watt kicker amp. It is plenty loud enough enough for me and will flex the heck out of the front windshield.
What so you think the drivers side may be on too far. Causing it to possibly rub against the diff seal or maybe just migrate back and forth causing a vibration
Ok guys I need some help. I recently put bilstein 5100's on my truck set at 2.1". They look great and ride great. However I've been getting a little chatter or tick or rub in my gas pedal. It feels like it's on the driver side.
It's not a steady vibration like a tire out of balance. It's...
Got in touch with original poster drones and we worked up a deal for the quads he now has back in his possession. Paid for and will be shipped soon hopefully.
Missed out on so many of these black factory quads for sale I didn't think I'd ever get a set. OP seems like a great person to deal...
I know it wasn't the best option but I took a couple of sheet metal screws and 1/2" plywood and mounted it right through the back of the cab. Then the amp with smaller screws to the wood.
You could try gluing it with something strong to the metal. Bu I didn't want to fool with it again if it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.