Recent content by hscustom
-
H
What DON'T you like about your RAM?
Sorry for a possibly dumb question but are you referring to the headlights ? Sent from my SM-G950W using Tapatalk- hscustom
- Post #948
- Forum: General Discussions
-
H
Sadly, it's about that time. If you measure snow by the foot, come on in...
Not sure if anyone has said anything yet but I would avoid the duratrac ! My shop has warrantied 4 set in the past 2 week ! In all honesty a real winter tire (toyo observe g3 ice, blizzak DMV2) are they best bang for buck. Sadly they don't come in bigger sizes. If your looking for a decent... -
H
Show me your wheels!
18x9 0mm fuel Ripper with 35x12.50x18 BFG KO2 (sorry for the hazy pics, smoke from the fires in BC is bad) Sent from my SM-G950W using Tapatalk- hscustom
- Post #24
- Forum: Photos & Videos
-
H
Paint defects on every panel, rust warranty???
I have one bad one. Mines under the hood. gonna get it fixed just so it doesn't rust. Non the less it's not something you wanna see when you spend that kind of money. Yours seems to be a lot worse. Hope the dealer does something Sent from my SM-G950W using Tapatalk -
H
Tires with Level
They are Fuel Ripper 18x9 +0mm matte black face with gloss black bead lock. (The attached picture is another set we did just to show the color better) Sent from my SM-G950W using Tapatalk -
H
Tires with Level
I'm running 35x12.50x18 on 2.5" level kit. No rub or trimming. Only hangs out about a half inch. Sent from my SM-G950W using Tapatalk -
H
Bolt pattern
My 35's are maybe 1/2" outside my flares. Sent from my SM-G950W using Tapatalk -
H
Bolt pattern
The 5x5.00/5x5.50 usually means the wheel is dual drilled for multiple applications. 0mm offset is great for Ram 1500. That offset will fit basically flush with your flares as long as you don't run a 305 or larger tire. Sent from my SM-G950W using Tapatalk -
H
Opinions needed!
I got hubcentric spacers made and they worked perfectly. I'll attach some pictures when I get a second. Sent from my SM-G950W using Tapatalk -
H
Opinions needed!
You can fit 35x12.50x20 with a leveling kit on stock wheels. You have to run a 7mm spacer in the front to clear upper ball joint. You cant run mudflaps either. So with 3" your setup will work just watch the spacing between tire and ball joint. Sent from my SM-G950W using Tapatalk -
H
New To Forums
Been a creeper on forums for a little while now. Thought it was time to share my builds and possibly my knowledge. A little about me first. I live in Calgary, Alberta, Canada. I have been working at a shop in town for the past 6 years. Shop specializes in aftermarket products (wheels, tires...- hscustom
- Thread
- Replies: 9
- Forum: Introduction
