Looks good! You should get a mirror running light kit for it, it would go well with the rest of your setup! https://www.jhdlighting.com
Sent from my iPhone using Tapatalk
The door panels off the remodeled HD Rams do in fact fit all 4th gen Rams. The doors are the same on 09-20 HD Rams. I’ve already seen swaps on a FB page
Sent from my iPhone using Tapatalk
I have had both the clutch style in my 12’ 1500 and currently the AAM Helical in my 15’ 2500 and I would definitely choose the worm gears over the clutches. Engaging feels better and will outlast the clutch style.
Sent from my iPhone using Tapatalk
The ones I picked up were 10.9s from my local Fastenal. I just pulled up an amazon link thinking they were the same.
Sent from my iPhone using Tapatalk
Getting the stocks off was pretty easy. Had plenty of room. The headers are more of a tight squeeze and the dipstick does need to be bend out of the way a bit, but not cut. Some have switch to braided dipstick tubes also. But for the stock manifolds it’s no problem
Sent from my iPhone using...
Definitely. I planned on doing mine at 50k but only made it to 46k before they broke lol. Better hardware and gaskets should hold up much better than what’s on there from the factory. Less than $100, and saves you a lot of headache! Extracting the broken bolts isn’t too fun!
Sent from my...
Checked them and they were nice and flat. Just cleaned them up a bit with brake cleaner and a shop rag before installing with the new gaskets and hardware.
Sent from my iPhone using Tapatalk
You’ll need 16 M8-1.25x50 grade 8 bolts for the exhaust manifolds. Here is a link to some hardware and the gasket I used on mine.
Bolts:
https://www.amazon.com/dp/B00KJBEQ3M/ref=cm_sw_r_cp_api_i_UxpjCbQ7WMJTX
Gasket...
Just over 46k. Thought I had just broke 1, but actually had 2. The upper ones closest to the firewall on each side. Then I snapped one other one trying to take it out, totaling 3.
Sent from my iPhone using Tapatalk
Got the tick one afternoon when I went to start my truck to go on lunch. Ordered some JBA shorties since figured may as well upgrade while I’m there. Ran into clearance issues with the frame in my 15’ 2500 and had to send them back. Ended up doing grade 8 hardware and using a 6.1 Hemi gasket...
Has anyone installed JBA shorties on their 5.7 Hemi in their 2500/3500 Ram with the 14+ Radius arm suspension?
Had some broken exhaust manifold bolts. Took off the stock manifolds, extracted the broken bolts and went to install the headers but having trouble clearing the frame on the passenger...
Rented Tracy’s scanner tool to adjust mine a few weeks ago. So happy that EVIC animation doesn’t pop up every time I start the truck...
https://tehamann.wixsite.com/tracystruck
Sent from my iPhone using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.