Recent content by MANual_puller

  1. MANual_puller

    catch can or tuner which one will give best performance

    Did you get the sticker on level without any bubbles? Every bubble is a 0.87 hp loss and every 0.5 degree off level is a 0.5 hp loss :naughty:
  2. MANual_puller

    Hemi production ending?

    The Hemi thrives on being a relatively simple engine. With the quantity on the road the failure rate is pretty low. With all the extra systems on a turbo6 engine there's no way they are cheaper to produce so that can't be the driving force behind a move. The leakoboost hasn't proven to be any...
  3. MANual_puller

    Chevy guy just switched to a 6.7 anything i need to watch out for?

    Watch out for chebbies too, they're always in the way :naughty:
  4. MANual_puller

    87 0r 89 octane

    Well, fwiw they only have 1 hose for all 3 grades so my truck does see some ethanol no doubt. Just whatever is in the hose so not much. We have a bp station 1/2 block away across the street where I get my 91e0. If I want 87 e0 for the mower I have to go about 6 blocks away to the Casey's...
  5. MANual_puller

    87 0r 89 octane

    Where at in Iowa? Here(Vinton) we have 87 without ethanol, 87 e10, 89e10 and 91 without. We also have a "corn station" that offers 4 different ethanol blends 10-85%. About the only thing I can't get is 93 octane.
  6. MANual_puller

    What looks better crew or quad cab

    Nah, you're thinking of the mega cab :naughty:
  7. MANual_puller

    Are these tires worth buying?

    Yeah, the kumho is a directional tire and cannot be rotated properly without dismounting. Mounted they can only be rotated front to back same side but even if you do that regular enough they won't cup. Basically the ones that were on the front cupped from never being rotated. The guy ruined a...
  8. MANual_puller

    Grease Zerks

    A lot of aftermarket replacement ball and u joints from carquest are greaseable. As they get slop and wear out I usually replace them with a greaseable unit. I like doing the service and they have a lifetime warranty so why not?
  9. MANual_puller

    Taking my 2011 to the shop

    Ever thought about doing a set of shorties? If you're just looking to get rid of the factory garbage this might be an option. I think a couple brands even use the factory y-pipe/cats.
  10. MANual_puller

    Rpms dropping during braking

    The 3865 in your signature, is that a sc 3865 tuner? Can you bump the idle RPM up some with it? You get the idle up where you want it that might help find where the drag is if there's an accessory bearing going out. Wouldn't hurt to check your transmission fluid level, that's been known to...
  11. MANual_puller

    Rpms dropping during braking

    For the 186,749th time, a hemi does not have a maf sensor. They use a map system.
  12. MANual_puller

    Rpms dropping during braking

    I miss that guy :roflsquared::roflsquared::roflsquared::roflsquared:
  13. MANual_puller

    Rpms dropping during braking

    Something is off with the wording/explanation or you've been hanging around hemipower95 2.0 to come up with a question like that :naughty: :roflsquared:
  14. MANual_puller

    catch can or tuner which one will give best performance

    That's bogus because they are sealed lol
  15. MANual_puller

    catch can or tuner which one will give best performance

    The secret is in the adhesive. It really locks in the mod for maximum performance :naughty:
See more

Latest posts

Members online

... and 6 more.
Total: 1,178 (members: 56, guests: 1,122)
Robots: 1,835

Forum statistics

Threads
195,648
Posts
2,872,904
Members
156,484
Latest member
OutlawFMX

Share this page

Top