mrack's latest activity
-
mrack replied to the thread Why cant I get the Headlight to come out of 2013 Ram 1500 ?.You need to remove the grill to have room to grab the light better, it’s just 4 screws and some clips takes 60 seconds. Then pull the... -
mrack replied to the thread Spline socket size.Most likely they are aftermarket gorilla spline drive lugs, they’re the most common for aftermarket wheels. I don’t seem to have the...
-
mrack replied to the thread Why cant I get the Headlight to come out of 2013 Ram 1500 ?.There’s a ball and socket towards the back of the light you have to pop loose to get the light out, first time removing them it will be...
-
mrack replied to the thread Ram 1500 Front bumper for 2013-.Yes any grill for a 13-18 1500 will work
-
mrack replied to the thread Ram 1500 Front bumper for 2013-.You’ll just need to swap to a 13+ grille with the notched lower corners as well. Other then that it will all bolt up just fine.
-
UPDATE! AFTER 14 WEEKS! Ram care will be reimbursing me for all of my out of pocket expense. Tonkin Hillsboro CJDR emailed me saying...
-
mrack replied to the thread Lift Recommendations.Towing a trailer of that size, personally I would keep it under 3”. Look at bilstein 5100 and 6112, Fox 2.0 and 2.5, eibach, do some...
-
mrack replied to the thread Rear coil question on 2021 1500 Classic Warlock.Your saying 6 gallons difference in fuel tank size, weighing less then 40lbs assuming both are completely full, cancels out the heavier...
-
And whatever you yo do, MAKE A BACKUP with AlfaOBD of YOUR current configuration. Makes it real easy to back out any changes that didn’t...
-
mrack replied to the thread Rear coil question on 2021 1500 Classic Warlock.You just explained how they sit higher. Move the heavier spring over to the lighter side, and add an even heavier spring in to the...
-
You can't hold a seller responsible for buyers who don't leave feedback. If a buyer is unhappy they almost certainly will leave...
-
mrack replied to the thread Bilstein 5100 vs 6112.I have the 5100s and wish I’d got the 6112s all the time. The 5100s are great for what they are and I’d recommend them for most people...
-
-
mrack replied to the thread Buying mopar lifters on eBay?.Appreciate the input, I’ll go for it. Paying $1k from a mopar site is pretty much out of budget, it’s for a flip project that’s only...
-
-
Buying from ebay can be risky. But there are often telltale signs that suggest something is off with either the seller or the items...
-
mrack replied to the thread Buying mopar lifters on eBay?.Was the cheap set you got mopar that turned out to be counterfeit, or something aftermarket like enginetech?
