Recent content by mselph544

  1. mselph544

    Lifted and fender flares?

    I don't know why it made all my pictures super tiny on the previous post.
  2. mselph544

    Lifted and fender flares?

    You and I are twinning like a **** :roflsquared::crazy:
  3. mselph544

    Bypassing TIPM module for low beam on 2016 3500??

    Here is a pic
  4. mselph544

    Bypassing TIPM module for low beam on 2016 3500??

    I'm gonna be that guy who just says.."buy the harness" No headache. Warranty works cause I used it. And all plug and play. TheAutoLEDcorp hooked me up with full front end. Hid lows, led fogs and led highs for 435 shipped. Had an issue with a led going bad. Replaced it, no questions asked.
  5. mselph544

    Shock squeak *fix*

    So that rear end squeak came back. Found the issue. If anyone has issues with aftermarket shocks squeaking. Check this out. This bump stop plate near the eye on the shock that bolts at the top is what was squeaking on my truck. (See picture) Now, it seensures when the shop torqued down the...
  6. mselph544

    Steering wheel "clunk"

    I had a coworker turn the wheel while under the truck. I can hear it but it's quieter. With my head near the rack, the sound seems to come from higher, so my guess would be inside the cab. I put my head under the dash. Looking at where the splines from the shaft align, as it rotates I can't see...
  7. mselph544

    Steering wheel "clunk"

    Anyone have this issue or know what it is? It only does it when sitting still and slightly turning the wheel to the left. See video in the link https://youtu.be/sF4KAWmmhRM
  8. mselph544

    Lifted 4th Gen Pics - Show Em Off!

    Here's some more ROW and work photos. As some of you know. I spend a lot of time on the road. These pictures are from my time in Pensylvannia.
  9. mselph544

    Lets see those trucks flexing.

    A little fun today pipelining Nothing too crazy
  10. mselph544

    Off Roading

    Anyone have some good flex pictures or some insane climbs they did? Post some pictures and some stories!!! Wish I had someone outside to take some pictures. These were some steep climbs in North Pennsylvania.
  11. mselph544

    Getting ready to tow!

    Check under your dash, right hand side above your gas pedal. There should be 2 connectors tucked off. If you have these, you're gold. The factory controller needs these. You will have to go to the dealer for them to unlock the system. But I believe they quoted me 150 for the full install and...
  12. mselph544

    Getting ready to tow!

    Yes and yes. No extra noises. Kinda weary about the bottom mounts only using one Bolt for the bracket and one for the bag. Gonna test ride a bit, may modify the mounts for peace of mind down the road.
  13. mselph544

    Getting ready to tow!

    Alright. So I got my Total Load Control bags in today. Wasn't gonna install them til i got the air system, but I'm an impatient person and bolted it up with the schrader valve near the recieved hitch. Got them currently aired up at 8 pounds for now, until I need to increase it for load purposes...
  14. mselph544

    6" RCX lift install

    Went by the shop today. Flipped the shocks and no more squeaking. Apparently the eye was rubbing against the mount. No more noise.
  15. mselph544

    6" RCX lift install

    There are better lifts out there. It all depends on what you plan on doing with your truck I guess. Like me, I will end up upgrading to taller springs and get some nice struts for the front. I do a lot of trail riding, but not much "mud riding". I was looking for ground clearance. Not a...
See more

Latest posts

Members online

... and 98 more.
Total: 1,871 (members: 148, guests: 1,723)
Robots: 1,767

Forum statistics

Threads
195,703
Posts
2,873,537
Members
156,587
Latest member
rtracy

Share this page

Top