Recent content by NITROUSCHRIS
-
Just about where I want it!
Jon, its a McG's kit with 2" spindles and 1" springs up front, and a flip kit with stock shackles in the rear at about 5" drop. with bell tech street performance shocks and I bushed everything with energy suspension bushings and did my own c-notch in the frame. SRT replica wheels and 275/45/20...- NITROUSCHRIS
- Post #11
- Forum: Lowered
-
Just about where I want it!
Thanks guys! I really appreciate it! Its soo frigging fun to drive!- NITROUSCHRIS
- Post #10
- Forum: Lowered
-
Lowered 3rd Gen Pics - Show Em Off!
3/5 drop. Spindles, springs, and flip with notch and air bag leveling kit I fabbed to help keep her stable with my motorbike trailer. Tires are 275/45/20s. Rides REALLY nice!- NITROUSCHRIS
- Post #318
- Forum: Lowered
-
sct tuner help
I connected it to my lap top tonight and it doesnt do anything but power up as if it was in the truck. No prompts, nothing different, no options to change anything or load any thing.- NITROUSCHRIS
- Post #4
- Forum: Engine & Performance
-
-
sct tuner help
Is that the trick im missing? Connect it to PC first? I have not done that. Like I said the directions are awful and the provided disc doesnt even have dodge on it.- NITROUSCHRIS
- Post #3
- Forum: Engine & Performance
-
sct tuner help
I bought an SCT tuner #3200 for my 07 hemi, 1500. right now im a bit irritated with it. not only does the "instructions" disc not have it on there, it only has gm, ford, and tractor to select from. I simply want to use it to correct speedo for tire size, but there are only a few limited menus on...- NITROUSCHRIS
- Thread
- Replies: 3
- Forum: Engine & Performance
-
Just about where I want it!
I haven't posted in a while, been busy working on the truck and bike stuff. But I finally got my ram sitting just about where I want it. Just waiting on 1" lower spring and im calling it done! Got the new tires and rims last week!- NITROUSCHRIS
- Thread
- Replies: 10
- Forum: Lowered
-
Motorcycle owners club
Just got back from its first street ride since the winter remake.- NITROUSCHRIS
- Post #177
- Forum: Ram Clubs
-
Hellwig Rear Sway Bar Installed
Awesome man! Can you post a few more detailed pics of the mount areas? I also have a 2/4 drop and wanna add a rear bar and that pan hard bar has my interest... $?- NITROUSCHRIS
- Post #9
- Forum: Engine & Performance
-
fabbed air load bag kit!!
Little revival on this. Last june I did finish this up. I've since added an on board compressor (on sale at cycle gear for $10) a 2 position toggle switch ($3from work) up is compressor on, middle is off, down is dump. along with a 3 way electric solenoid ($20 from my work) and a 5psi crack...- NITROUSCHRIS
- Post #31
- Forum: Lowered
-
-
Made my catch can tonight.
Yeah, I never said it was in the pcv system. But simply, the filler neck IS vented to the air box(unrestricted). The airbox is under slight vacuum (its not a pressurized "ram air" system) and DOES pull a small amount of crankcase pressure out thru the TB depending on throttle input or load...- NITROUSCHRIS
- Post #7
- Forum: Engine & Performance
-
Made my catch can tonight.
Just made another one for a 2013 hemi, today!- NITROUSCHRIS
- Post #5
- Forum: Engine & Performance
-
The "tick"
Mine went almost completely away with mobil 1 , 5w20 synthetic. Just such an odd noise- NITROUSCHRIS
- Post #5
- Forum: Engine & Performance
