Recent content by piper618
-
Location of Ground 2021 Ram 1500 with 5.7L V8 Hemi engine with eTorque
You can use the negative one of the several terminals attached to the fuse block -
Tow mirrors HELP
Thank you Crash I will give it a try. Here's what has been happening and what happened when I cleared the CEL. The old sensor is in place and sometimes I can see the temperature start to rise very slowly to the real temp from -40. It will finally reach the correct temp and when I turn the truck...- piper618
- Post #13
- Forum: Towing & Hauling
-
Tow mirrors HELP
I switched out the ambient temp sensor with the old one from the original mirror no luck still -40 degrees. I checked the black and white wires coming from the sensor to see where they lead too in the terminal block. Both the old mirror and the new mirror pin out in the same location. I then...- piper618
- Post #11
- Forum: Towing & Hauling
-
Tow mirrors HELP
I will do a search for that and look into switching out the temp sensors. Thanks Sent from my iPhone using Tapatalk- piper618
- Post #10
- Forum: Towing & Hauling
-
Tow Mirror upgrade, questions?
2015 Ram Big Horn - removed factory plain mirrors and installed factory tow mirrors with puddle light flip up ect. and ambient temp sensor. Once I installed received engine light on dash and outside temp read -40 degrees. Took to dealership $108 to flash code LEC, LED, LEG and everything... -
Tow mirrors HELP
2015 Ram Big Horn - removed factory plain mirrors and installed factory tow mirrors with puddle light flip up ect. and ambient temp sensor. Once I installed received engine light on dash and outside temp read -40 degrees. Took to dealership $108 to flash code LEC, LED, LEG and everything worked...- piper618
- Post #8
- Forum: Towing & Hauling
-
Working tow mirror upgrade!
2015 Big Horn Tow Mirror issues 2015 Ram Big Horn - removed factory plain mirrors and installed factory tow mirrors with puddle light flip up ect. and ambient temp sensor. Once I installed received engine light on dash and outside temp read -40 degrees. Took to dealership $108 to flash code... -
-
Intermittent A/C 2014 Ram.
My 2015 1500 5.7 hemi just started doing the same thing. It works some times and others its above 80 degrees. I will be making an appointment tomorrow with dealer. I know when I drop it off the a/c will working. I did take pictures of the a/c on max and thermometer in vent showing 85 dehrees- piper618
- Post #9
- Forum: General Discussions
-
Remote start
If you are looking to install remote start with OEM Key Fob with pushing lock button three times then you will have to purchase 4X10/5X10. They will have to change the title to over $100 because the DBALL2 is no longer available for install New Dodge models. They have started a new web site and...- piper618
- Post #2
- Forum: Audio & Electronics
-
Installing OEM backup cam
RLK my radio is original (RA2) as I have 2015 Big Horn I am looking to upgrade mod to Nav as I have been looking at the thread and I just ordered the supplies to make up the harrness.- piper618
- Post #386
- Forum: Audio & Electronics
-
Installing OEM backup cam
I agree with Mpgrimm2 I would see if anyone will let you swap out their RA2 and above and see if that will work for you. Purchasing another and finding out it does not work will be an expensive no grids. If you can possily get an update for your radio that might fix the issue also I...- piper618
- Post #362
- Forum: Audio & Electronics
-
4th Gen Remote start for under $100
If you are looking to install remote start with OEM Key Fob with pushing lock button three times then you will have to purchase 4X10/5X10. They will have to change the title to over $100 because the DBALL2 is no longer available for install New Dodge models. They have started a new web site and...- piper618
- Post #530
- Forum: 4th Gen DIY
-
Installing OEM backup cam
- piper618
- Post #320
- Forum: Audio & Electronics
-
Installing OEM backup cam
This morning I started to work on the radio. You would think this was the easiest part just three wires to install. I know I saw someone post that the three wire location in the OEM photo is wrong. Well I am a believer as I did what the OEM directions said and depopulated the three wires and...- piper618
- Post #313
- Forum: Audio & Electronics
