Recent content by zacbar
-
Z
Morimoto XB LED Headlights INSTALLED
Not sure if this is old news but it looks like they are now available with amber DRL's https://www.morimotohid.com/ram-amber-xb-led-headlights-morimoto-09-18?quantity=1 -
Z
Morimoto Headlights
Canadian trucks with non-projector headlights (dual or quad reflectors) utilize the high beam bulb at a reduced brightness as the DRL. This is why your "brights" are on, and they are flickering because the truck is trying to run them at a lower voltage. Your best bet would be to utilize alfaobd... -
Z
Cab height after Bilstein 5100s
I am considering installing Bilstein 5100's on my truck and likely setting them at the 2.1 setting. Will it adjust the overall height of my truck? Been trying to wrap my head around this, and I've received differing explanations from people. Right now the back of the cab is obviously the... -
Z
Tire help can't make up my mind.
Recently put a set of KO2's on my truck and I absolutley love them. They are phenomenal in the snow (comparable or better than actual winter tires I've run on previous vehicles), granted they are brand new so we will see how they do as they wear. My tire guy warned me that they will be louder... -
Z
Rattling dash storage drawer
Messed around with it this morning, it seems like its latching well. It doesn't open at all unless I depress the latch. The drawer itself seems to have a lot of play though, I can move it up and down a bit -
Z
Rattling dash storage drawer
Fairly sure. I have to depress the handle in order to open it so it's closing enough to latch at least -
Z
Rattling dash storage drawer
I have a 2017 Ram SXT so it's got the bench seat, no center console. At the bottom of my dash below the radio/HVAC/trailer brake is a slide out storage drawer, which I am pretty sure is causing this awful rattling noise. If I put slight upward pressure on the handle of the drawer, it stops the... -
Z
Aftermarket radios that don't require cutting?
Probably a dumb question, but are there any aftermarket touchscreen radios that don't require cutting the metal bracket inside the dash? There's a few new "floating" style touchscreens as well as some single-din touchscreens - do they all require cutting?- zacbar
- Thread
- Replies: 4
- Forum: Audio & Electronics
-
Z
Boost Auto Parts GM Mirrors
Has anyone installed these (or the other style) with the Signal & Running Light mod? Wondering how challenging it was. The video overwhelmed me lol -
Z
2019 classic with reflectors and HIDs
Sweet, looks good. Did you install all the harnesses and relays and what not or did you use alfaobd? -
Z
Day Time Running Lights
Anyone on here using their marker lights as DRL's? Some Toyota's and f-150's come from the factory like that, and I like the look. Wondering how it looks on Rams...- zacbar
- Post #3
- Forum: Audio & Electronics
-
Z
Morror turn signal running lights
First I've seen this. Looks a lot easier than the others I've found -
Z
Morror turn signal running lights
Haven't done it myself, but it's a mod I've been considering. There's a few kits you can buy. Boost auto parts makes two versions, and JHD Lighting sells one as well. -
Z
AlfaOBD
Thanks, thats what I was hoping to hear. Do you remmeber the settings you used? I'm assuming optional DRL, and set the output location as turn signals, thats it?- zacbar
- Post #11,241
- Forum: 4th Gen DIY
-
Z
AlfaOBD
Has anyone changed their quad headlight DRL location from high beams (default for Canadian trucks with quad headlights), to turn signals? Want to try this, curious if it will light the turn signals up in their dim or bright setting.- zacbar
- Post #11,235
- Forum: 4th Gen DIY
