Search results

  1. cpudoc

    Deal?????

    Supposidly he sold the truck a year ago and has been just holding on to the stuff. I hope its legit!
  2. cpudoc

    Deal?????

    Yes... Fell into a great deal I think
  3. cpudoc

    Deal?????

    K&N CAI, TB spacer and Hypertech programmer $100.00 What do you think? good deal?
  4. cpudoc

    Hemi Throttle body Cleaning

    I Just did my 5.7 yesterday and it took me all of 25 minutes. The differance in the idle and Throttle response is great! Agin it was , by far, the easiest thing that I have done on the Truck!!!!
  5. cpudoc

    P1501 and p1502

    Sounds like a good throtle body cleaning is in order. The DIY section has a great write up.....
  6. cpudoc

    The Ram that got Dodged

    As long as no one got hurt... Trucks can be fixed!!!
  7. cpudoc

    P0456 Removing canister assembly

    I changed the gas cap, I did the hoses that I could reach on the canister assembly, can anyone tel me the easy way to drop the assembly to check/replace the top hoses/ Thanks, Ron
  8. cpudoc

    I also have a HID issue

    Bro,YOU ARE the MAN!!! Pinned wrong, Thanks
  9. cpudoc

    Plasti-dipped grill w/ DSK Texan's oem badge

    Looks Freakin' awsome!!!!
  10. cpudoc

    What is this?...

    Its def a Vac line, Maybe to the HVAC system
  11. cpudoc

    cruise control problem

    I dont know if this will help, Mine did the exact same thing. I took some electrical contact cleaner and sprayed the steering wheel switches. Be carefule to cover the steering wheel and wear eye protection ( the shit burns when it gets in your eyes! Dont ask!) then work the buttons for a few...
  12. cpudoc

    I also have a HID issue

    Thanks, I never thought about that. But unless the ground is wrong, I doubt it would make a diff. Both resistors are the same value for High or low... Thanks
  13. cpudoc

    I also have a HID issue

    I bought the kit for the 9007 bulbs. When I put it in I got the flicker and the "Lamp OUT" on the dash..I ordered the relay kit and Resistor kit. I installed them both and now have the Flicker taken care of. I still have the "Lamp out" on Low beam When I switch to High, The "lamp out" goes...
  14. cpudoc

    Plasti Dip. Is there anything that is better

    VHT is the way to go for Lights. I PD'd my exhaust end sticking out buy the tires. It has held up very good.
  15. cpudoc

    Plasti Dip. Is there anything that is better

    Yup, Tires still have lots of life, so I will have to wait a year or so. Next is fender flairs, she has a little rust developing on the rear fender over the wheel well. I want fix the rust and install the flairs.......
  16. cpudoc

    Plasti Dip. Is there anything that is better

    Tail lights are VHT. I followed the "tint your tails with a rattlecan" DIY Yes the stripes were continued across the cover. Lots of measureing and tape Also did the lower front bumper One more pic! Again This site is GREAT!!! So far I have had the truck for 8 weeks and have done...
  17. cpudoc

    Plasti Dip. Is there anything that is better

    Thanks guy's I know its not perm, but thats the point. I cant revert back anytime
  18. cpudoc

    Plasti Dip. Is there anything that is better

    Spent an afternoon with my baby. Plasti dip IS FREAKIN AWESOME!!!!! Before After
  19. cpudoc

    The mod bug is an itch that I cant scratch :)

    Yup, Didnt see the year... No pins... Just be careful and you should be OK... Dont rush it
  20. cpudoc

    The mod bug is an itch that I cant scratch :)

    About 20 pins. Just get a small drill bit or punch and push the center of the pins through. The emblem, heat gun and fising line or just tape around it
  21. cpudoc

    The mod bug is an itch that I cant scratch :)

    Yes just the inserts
  22. cpudoc

    plug indexing

    Its a complete waste of time unless you are taking the truck to the track. I did it in my Big Twin on my Harley and noticed nothing. no change in performance or gas milage. I did notice one thing, it tokk me 2 times as long to change out the plugs!!!!!
  23. cpudoc

    New indash!! Exited!!

    Nice, Did you have the infinity system? What is the brand and model number? Im looking for the same type of unit
  24. cpudoc

    Thanks to All

    Thanks for the compliments.... @HEmiLonsatr Audubon, 5 miles from Phila. Pa
  25. cpudoc

    Thanks to All

    Hey everyone, I picked up my first Ram abourt 1 month ago. I have been reading the posts on the forum and they are great. I have: 1) Debadged 2) Tinted Rears 3) leveled front 4) Painted the headlights 5) Blacked out the grill 6) and installed Air Horns I love the truck and it looks...

Latest posts

Members online

Total: 1,102 (members: 48, guests: 1,054)
Robots: 1,317

Forum statistics

Threads
196,071
Posts
2,877,412
Members
157,092
Latest member
Isgrim

Share this page

Top