Search results

  1. M

    front suspension 2500

    2 or 3 years ago I did an overhaul on my front suspension (2004 2500 4wd QC). I upgraded to the next gen tie rod/steering setup with new steering shock, installed a steering box brace (these two mods cured my death wobble), put in the heavy duty $800 ball joints, new shocks front and rear, sway...
  2. M

    no crank no start

    Thanks for the help. I could get power to the starter if I jumpered the relay so the wire to the starter wasn't my problem. I gave up with the truck as it was too cold to work outside and I had checked out all the fairly easy stuff. I got the truck towed and checked out by a local mechanic...
  3. M

    no crank no start

    Anyway, sorry for the 3 posts where I could have written one. If anyone has been through this before I'd appreciate any advice. I'm in Pa so it's cold here and working outside is miserable. Somehow this truck manages to take a dump on me every time the weather is freezing cold
  4. M

    no crank no start

    Today I checked things out some more. There are 4 terminals on the starter relay. 1) 12v continuous, 2) 12v intermittent (from key in start position) 3) out to starter solenoid 4) clutch interlock I get 12v at the relay when I turn the key, and I made a small jumper wire to connect that relay...
  5. M

    no crank no start

    I have a 2004 2500 with 174k miles on it. Right now it's stranded a mile from my house, I shut it off and it will not start. It won't even crank. Recently it started having a short delay between turning the key and actually cranking over sometimes, it also has a problem with draining the...
Top