Search results

  1. J

    Ticking sound

    I forgot to post the links to the short videos I recorded. It's the higher pitch "tick" sound. Not worried about the other noise that's piston slap and expected.. Thank you everyone! https://youtu.be/0uLaoGhfCsU?feature=shared https://youtube.com/shorts/Q_fXsV-aDoo?feature=shared...
  2. J

    Ticking sound

    I have a little bit of an odd noise after doing headers, I'm not totally sure if it is related to the header tubing since it doesn't sound like others I've heard. Although there aren't others around here with modified cars/trucks.. I'm going to try to detail everything I've done. It's a built...
  3. J

    2013 4x4 8 speed swap

    I can do that. Russell mentioned changing programming in hp tuners but said its something I can't do. And I'd have to send him the tcu. Something in the bcm as well with alfaobd. Total cost there is 400. No problem. I'm only stuck at the wiring. I can swap the trans and make everything bolt in...
  4. J

    2013 4x4 8 speed swap

    Unfortunately I did. Since this is a 2013 there's no need for sga tcm and I didn't find answers to the questions I had in that post. You may not have read through it.
  5. J

    2013 4x4 8 speed swap

    I'm trying to gather parts for the 8 speed swap in my 2013. It's 4x4 so from some info I found on this site is should be a fairly straight forward swap. I can't find much information about wiring it in with the original computer. I am trying not to have to use the sga standalone setup. I've...
  6. J

    5.7 cam swap info

    Can you verify the springs I ordered are correct? 68277306AA Do you know if I need shims or not to get the correct install height? I ordered the 6.4 manual trans cam non mds as well as lifters and pushrods. Also changing oil pump and timing chain while I'm in there to be safe. Thank you all...
  7. J

    5.7 cam swap info

    Great! I'll have a look around for him. Thank you for the info!
  8. J

    5.7 cam swap info

    I am on a budget to a point, but I do plan on upgrading the oil pump, doing the timing chain, cam, lifters, springs, and pushrods. I'm more on a time constraint, that's why I'm trying to keep it simple for tuning. Do you happen to have the part numbers on the two cams? I can compare the pricing...
  9. J

    5.7 cam swap info

    Yea I was wanting to do non mds for simplicity. Looking into the SRT 6.4 manual transmission cam. I believe I have a part number for that to confirm it's correct.
  10. J

    5.7 cam swap info

    Even with the non mds cam?
  11. J

    5.7 cam swap info

    It's making quite a bit of noise. Already did headers and no exhaust leaks. When fully warm it ticks alot. I do auto repair for a living, not a big deal to change cam and lifters, already using redline oil and will continue. I don't have a problem putting back a stock non mds cam and lifters. I...
  12. J

    5.7 cam swap info

    I have a 2013 ram we recently bought. It ticks pretty bad when fully warmed up. Already did headers and made sure no leaks. I am going to be doing cam and lifters very soon. I have read alot about people swapping in a 6.4 cam and delete mds. Would that be better than the mmx no tune required...

Latest posts

Staff online

Members online

Total: 1,439 (members: 43, guests: 1,396)
Robots: 1,563

Forum statistics

Threads
195,976
Posts
2,876,440
Members
156,968
Latest member
Bspice03

Share this page

Top