Search results

  1. Bravo1

    Fender flare, on or off?! Help

    I say keep them.One question though why is the setting's on the Bilsteins to low it looks like the truck sit level to me.
  2. Bravo1

    Bilstein's with Readylift

    Calicrew1500, Superlift's installation instructions states to set the blisteins struts at the OEM setting,and install the spacer on top. I have heard others thought set the struts at the .75 to 2.1.To try and level the truck due to the additional rear lift spring like mr-maenpaa shows in his...
  3. Bravo1

    Bilstein's with Readylift

    I purchase a Mopar/Superlift 4 inch kit most website's are discounting this kit 500.00 dollars.
  4. Bravo1

    Factory shark fin antenna.

    Is it possible to remove the roof sirrus (shark fin) antenna and mount it some were else? Or could I use another Chrysler fin like on the 300 which is lower.
  5. Bravo1

    Bilstein's with Readylift

    I am looking at Mopar's 4 inch lift,but was kinda disappointed by the restriction on wheel.Does anyone know why no 17x9 was this a fitment issue or was it a stability issue.Only 18x9,or20x9.
  6. Bravo1

    Bilstein's with Readylift

    I will check into that thanks for the idea.
  7. Bravo1

    Bilstein's with Readylift

    I have the Mopar 0"-2" inch lift installed and the rear springs have jacked up the back end 2 more inch's from the front again,when I called Mopar they stated that because of the tongue weight,they needed a 2 inch's lift spring,because once loaded to max,the rear end will be level.I hooked up a...
  8. Bravo1

    Ordering a 2015 Ram - Seeking Advice

    Was there a reason for not selecting a 2014 Bighorn,or Lone star.or Express packaged trucks they are discounting them around 10,000 dallors. Some have V6,that are loaded pretty nice.There is not much discount on 2015 yet.Either power train you select will be fine as long as you do not select...
  9. Bravo1

    Check your tire jack

    I really pray that Ram engineering listens to this,before final OK for the refreshing of the truck for 2017,that they take serious what people are saying about the current model year of truck.The jack is dangerous period and at best a poor attempt in saving weight,by cheating the jack assy and...
  10. Bravo1

    Check your tire jack

    I too have used this jack ,and found that in the owners manual it shows a little notch located on the lower control arm this is were they want you to jack the truck from and get this I think from looking at the picture,they want you to jack from the front of the truck.Check the picture out in...
  11. Bravo1

    Is 2" lift enough for 34 tire? How is Mopar lift kits?

    Super lift part number is K4600.
  12. Bravo1

    Bilstein's with Readylift

    So if I want to go to the last setting on the Bilstein at 2.8,I should get a pair of ReadyLift's or some Zones UCA's.This will free up that angle everyone is talking out.
  13. Bravo1

    Bilstein's with Readylift

    Ryan the kit that is in the truck is a Mopar 2 inch,which performs really well for its height.I am thinking of getting the 4 inch Mopar kit,from Superlift.I just need the kit minus the shocks and springs.
  14. Bravo1

    Bilstein's with Readylift

    Yea I agree,I have one more setting on the Bilsteins,so I might use this to take up the difference from FRT to RR.And have a 1 inch diff,and call it a day.Have you heard of anyone having problems with the 5100's and the max lift setting ?.
  15. Bravo1

    Bilstein's with Readylift

    I am about 2 inch of lift in the frt,with this setting on the Bilsteins,and with the ReadyLift 1.75 we would be close on CV,Ball joint angle as well.
  16. Bravo1

    Bilstein's with Readylift

    I notice with Superlift's 4 inch lift they use a spacer that mounts to the Bilstein 5100 at the top before reinstallation in a 2013 Ram 1500.I currently have 5100 up front. The shock setting is at the number 4 ring position one less than the max position,and for the rear axle I have a SuperLift...
  17. Bravo1

    2" Mopar - Do they set Bilsteins at 2.1" or 2.8"?

    Yea I know it's awesome as well,because it is class leading.Zero issue's with tissue',with the lift.
  18. Bravo1

    2" Mopar - Do they set Bilsteins at 2.1" or 2.8"?

    I purchased a Mopar 2"lift kit,with Bilsteins frt,and rear.The tech at the dealership set mine at 2.1 inch.
  19. Bravo1

    Tire size swap out

    Thanks everyone.
  20. Bravo1

    It followed me home. Can I keep it?s

    Congrats 92Green YJ on your new Ram truck,and they ordered it really nice,how lucky is that ,and rain sensitive wipers,projectors headlamps,trailer tow package. Did they upload the nav system for free if so you saved a boatload full of money on that alone.The lifetime warranty is that from...
  21. Bravo1

    Tire size swap out

    Copy Gunner your thought's,at the end of the day I went with Nitto's Terra Grappler P-275/55/20,reducing the tread pattern to 9 inches, from 11 inch's shoulder to shoulder. The 275/55/20 coming in at a 42 lbs very close indeed to Goodyears P275/60/20 weight. Rim tolerance's were 7.5-(8.5)-9.5...
  22. Bravo1

    Tire size swap out

    The problem is that it is not the size of 275,but how the shoulder sit on the payment related to the rim after being mounted is different between tire manufactures,one will have 11 inch rolling resistance and another will have 10 inch of contact.LT,Floatation,P=rated all have different contact...
  23. Bravo1

    Tire size swap out

    Shawn,and Gator I am going to fit tomorrow a P275/55/20,in a Terra Grappler.I was running P305/50/20 a very nice tire and has a rather wide foot print of 11 inch across the pavement.So my tire dealership has been helping shrink that foot print down to 10-9 inch across on tread width.Are problem...
  24. Bravo1

    Tire size swap out

    Shawn226,well I like a fat tire look,but wanted a tire that was more closer to OEM specs and yet give me a better look.
  25. Bravo1

    Tire size swap out

    Just asking,am wondering what size to go for,with a Mopar 2"inch lift kit and the Bilstein setting on the frt is at 2.1 and a rear coil swap out it raised the back end 2" as well.I am changing out my Nitto Terra Grappler from a 305/50/20,to a well that's it I am stuck between 275/60/20,and...

Latest posts

Members online

... and 1 more.
Total: 1,276 (members: 51, guests: 1,225)
Robots: 1,810

Forum statistics

Threads
195,667
Posts
2,873,102
Members
156,520
Latest member
murv

Share this page

Top