Search results

  1. T

    will they fit

    have long tubes but I do not care for the sound when up higher in the rev range, while performance cats help with the sound and lastly will it cut into performance?:favorites13:
  2. T

    strangely

    with the long tube headers no cats of coarse the Vararam and my Magnaflow 14's I now do not have that terrible mds sound anymore. Why is this and oh how in hells bells do I empty the billet catch can from Moe's. I tried emptying the other day and either I am now a weakling 1 retarded most likely...
  3. T

    Moe's Performance I have a bone to pick

    It took me forever to get your sticker off the sticker but after 15 minutes it is now on my back window albeit not perfectly straight ie the M is higher on the left and performance is lower on the right. I will admit it is a very nice sticker but please make them easier to apply to our trucks...
  4. T

    Hemifever

    I purchased a new PCM with the Hemifever tunes, I can access 87 and 91 octane, is this correct. I have 1/2 a tank of 89 to burn and then will go to 91, is this still a canned tune or a Hemifever specific tune? When leaving the shop that did the install (gave them all the directions) the...
  5. T

    Loud and I mean real LOUD

    Yesterday I had the Vararam install, looks killer the catch can that he showed me is tiny and by that I mean 3-4 inches tall and roughly 1 1/2-2" across so it seems small, the tech said I just unscrew the bottom of the can to drain. The nice thing he did was weld all the new metal work instead...
  6. T

    Holy fast Batman referring Moe's

    Was not a week and my headers showed up along with the Vararam yikes that's fasssssssst. Now I am dying waiting for the pcm and cc:favorites13::happy107: If you are a Canucklehead and want it fast call Texas
  7. T

    Kudos and I don't hand them out all that often

    Yesterday I went into a local speed shop and this is what I ordered, a Moroso cc that had no brackets or hosing, an Airaid cai, Jba shorties, and the latest greatest Diablo T1000/pcm. The tool came out to 3300.00 CDN. Today I phoned Moes (5 cents a minute) and here is what I ordered, told I do...
  8. T

    crazy question

    I have a ton of 3M on my truck ie the complete front end, mirrors and down the complete sides of the truck. Now the question like me is there anyone else that polishes/waxes/clays the 3M:crazy::word::buffer::sleepy10:
  9. T

    your state or province?

    I took off my moulded rear mud flaps yesterday while I was detailing/power polishing my 22" rims (God damn they look good/or like chrome now), do I need to worry about the 5.0?????:favorites13:
  10. T

    tuners

    Am I missing something re tuners, I went to a Canadian site to look at the Diablo and when done ordering it does not mention a new PCM???? Would be great if we did not need a new PCM but. I also noticed this site dealt with JET and another tuner that slips past my mind but they cost...
  11. T

    after 2 years

    a few pics of the truck as well as a fresh coat of the German wax:favorites13:
  12. T

    feedback please and thank you

    2015 RAM R/T no mud flaps up front and tonight I took off the rear flaps. Yes or no to no mud flaps all the way around. I have 3M along the bottom from the front of the door to the bumper but at the back it looks like the last tread will be able to throw rocks/debis. So yes or no to removing...
  13. T

    what is the norm

    As I head back to the house I have to take a hill that is a 600' drop. I put the truck in 4th to keep the speed between 40-50 mph but it seems to stay in 4th for a few hundred yards even though I am down to 30 mph at the bottom (enter town). I guess I am asking if this is normal.:favorites13:
  14. T

    plates whatcha got

    I have not seen any threads pertaining to this subject matter, having said that if you have personalized plates what do have. Me NO FIAT:happy107:
  15. T

    round two

    I remember when I first joined I started a thread that went like this "when you fill up how many miles to empty showed up re highest number you have seen" At that time I had a 14 Sport rcsb Hemi 4x4 with 3:21's and the odo was @ no more than 5000 miles. The highest number I saw with that truck...
  16. T

    Bored so time for another road trip

    garden is in so the wife can look after that, I am headed from the Canadian Rockies to Saskatchewan then south just under the border and all the way east to St Ignace Michigan then I75 to the Motor City and across the border again to Cottom Ontario which is just S.E of Windsor. Going to go for...
  17. T

    being anal

    Had the Belltech setup installed yesterday with the Spohn adjustable pan hard bar. I am just a tad picky and noticed the tire on the right rear is out about an 1/8" more than the rear left. How do I correct this smallish issue. Thanks in advance:favorites13:
  18. T

    best lowering setup-just kidding truck is lower

    Had the truck lowered with the Belltech 2/4 and Spohn pan hard bar. The ride from the city back home did not seem all that different in terms of ride quality over the stock setup. As far as cornering goes I will have to wait on that as there was no onramp situations. Other than a few other...
  19. T

    Paint

    In the thread concerning gripes and the sort (I have seen other threads/posts) some are saying their paint job from the factory is not that good. To be honest I have purchased 3 RCSB Hemi's 2 being 4X4's, a 2010, 2014 and the 2015 R/T and being the ocd type I have polished/waxed the living Jesus...
  20. T

    Panhard bar

    For those:favorites13::favorites13: that lowered what Panhard bar did you go with/manufacturer. Thanks in advance. Oh the 6 hour labour bill is just and estimate so if it takes only 4 hours I have 300.00 free dollars to play with:favorites13:
  21. T

    Going down part deux

    I phoned my supplier after going online and cancelled the shocks for the up-graded Street Performance shocks. For the guys that have lowered did you have a Panhard bar installed and to those that did not why did you not find it necessary?:favorites13::favorites13::favorites13:
  22. T

    Going down

    Not that way you perverts! I had a shop order all the necessary parts for a complete lowering. It will be a BellTech job and with an alignment labour etc the bill comes to 2150.00 all in or out the door. Don't forget our dollar is worth poo so I am paying a premium as the parts come from south...
  23. T

    cost in Canuck bucks

    For anyone that has lowered their truck (the 2/4) with Belltech or the other popular brands what was the total cost parts/labour????? Thanks in advance.:favorites13: I guess I should add with all the accessories to make it a 100% proper lowering.
  24. T

    colours

    It seems like some new Rams are few and far between in regards to colour ie Orange Green etc. I finally got away from black and now have the Metallic red, having picked that colour I have yet to see another. Am I just blind or is it a rare colour?:favorites13:
  25. T

    who's the site clean freak.

    As an example lets go with the GT500 (2009) and my stats. Up to this point it has 2400 miles and 219 hand coats of polish/wax/paint cleaner so right around one coats for every 11 miles. When I do the toys I wax under the hood where any metal is accessible, the door jambs and all the metal under...

Latest posts

Members online

Total: 1,192 (members: 48, guests: 1,144)
Robots: 1,515

Forum statistics

Threads
195,842
Posts
2,875,142
Members
156,817
Latest member
tab10

Share this page

Top