I was able to source a used longhorn dash. Instead of swapping entire thing in since its from a 2012 gasser vs my 2014 diesel, can I swap just the pad part instead.So not the entire dash assembly. Any links or other success stories.
Attached is my factory dash pic.Appears as if the brown part...
procomp es9000 --- EXP 918553 for front leveled ----- EXP 927543 Rears
got them from 4 wheel parts about 6 months ago at a very good price.
Ride great!
Im running 35*12.50 Cooper ST Maxx on factory 20s on leveled Daytona QC 4*4. Rubs just a tad if you hold it at full lock and go. If I have a tight turn I go full lock then let the steerign wheel slide an inch or two before I proceed and no rubbing.
I havnt had a chance to look at my stock units in my truck but much like any other injector out there a rebuild is a reasonable alternative. I own a small european auto repair shop and we frequently rebuild bmw/mercedes/volvo etc injectors with excellent results using an asnu unit.
If it...
Truck is 05 Daytona QC 4X4 (hemi of ourse). Only mods performance wise are the factory borla catback and true functional ram air cold air intake. Dont recall brand.
What Im looking for is a tuner that can recalibrate for my upgraded tires to 35s and I will soon be installing dynatech headers...
While at home depot I quickly scoot under truck and backed out the passenger side bolt about 3/4 of a turn. I drove around for a good 30 min and remeasured.
Results - ALL 4 corners are now at 40 7/8. Pretty dang good for me just guessing 3/4 a turn would do it. Now my ocd is settled and Im...
Ok long story short. Over this past weekend I replaced all shocks with ProComp 9000 +2 inch front/+1 rear. I Cranked the stock keys and week prior I put on new 35*12.5*20 Cooper st maxx tires.Factory 20s.
Results after a few days driving to settle. Its level side to side but not all around...
Greetings. Recently acquired an 05 daytona quad cab 4x4 with 82k miles. I have cranked the keys and am still seeking a higher amount of lift. Problem is there appears to be no kits at all for the front other than the keys that I've already cranked. I see spindles and spacers etc for 2wd models...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.