Search results

  1. cdyt7717

    Whats the single biggest mistake you made with/on your truck

    Drove home with chest pains, didn't think much of it, between that and my shortness of breath, I passed out and hit a mailbox and a tree. Walked away with a just a few scratches, and a hellacious bit of medical bills!
  2. cdyt7717

    P0133 & P0153 oxygen sensor codes

    Copied from a Ford forum, probably still relavent though "I had the same problem. Since the banks are further away from the engine with LTs it was taking too long for them to warm up and going into open loop before they could warm up properly. My tuner extended the loop time and I havent had a...
  3. cdyt7717

    P0133 & P0153 oxygen sensor codes

    From what I've read on forums seems to most likely be a small exhaust leak. I Installed LT headers and high flow cats and got a list of codes Im working through now, from cat inefficiency, to fuel trim lean and these two codes. You may need to pressurize the exhaust system and check for leaks...
  4. cdyt7717

    Built trans?

    ATS Diesel makes one but it's pretty expensive ATS | 545RFE Automatic Transmission - 2003-09 Dodge 1500, 2500 HEMI * 2-Wheel Drive * TRANSMISSION ONLY * 
  5. cdyt7717

    What did you do to your Gen3 today?

    These came in today! I can't wait to get em on, also washed the truck yesterday and started blacking out stuff
  6. cdyt7717

    Mileage on your 3rd Gen.?

    07 QCSB 4x2 5.7L ~67,000 miles
  7. cdyt7717

    Only warm/hot air

    Hey guys, my truck only blows warm/hot air, even on cold. If I turn on the a/c it will get cold though. I remember seeing a post about fixing the issue but can't find it. Can anyone help me out?
  8. cdyt7717

    Aftermarket cooled seats?

    Has anyone had any experience with the cooled seat kits in cloth seats? Do they work good? Or not worth the money?
  9. cdyt7717

    Truck bed

    If nothing else, LMC truck may have them.
  10. cdyt7717

    Looking for a black grille

    Just PlastiDipped mine with the wheels
  11. cdyt7717

    Blacked out Rams, Let's see em!

    Bump
  12. cdyt7717

    Rear Glass

    There is a bead of urethane that holds it in. It'll fit it it's the same bodystyle. You'll have to cut that bead to free the glass. There are various tool to do it with but it'll be difficult without air tools
  13. cdyt7717

    Power Sliding Back Glass Switch

    Can someone please take a few pictures of their switch and how it mounts in the black surrounding piece for me? Thank you in advance! I am trying to mount mine in another place so I can keep the long cubby that replaces that switch. (PO did a bunch of stupid stuff)
  14. cdyt7717

    Power Sliding Back Glass Switch

    Can someone please take a few pictures of their switch and how it mounts in the black surrounding piece for me? Thank you in advance!
  15. cdyt7717

    Backup cam install

    Im not sure why my picture uploaded upside down...I do like that view a little better. I still need to adjust it a little as it's not perfectly straight. In other news, my 2007 1500 and my dad's 2003 3500 dually get the same mileage towing! I never would have imagined. We both averaged 12.5 mpg.
  16. cdyt7717

    Backup cam install

    You can see it just fine!
  17. cdyt7717

    Backup cam install

    It's been a hell of a time. The first camera was defective and i just got the replacement installed today. Works great. The view is a little father up than I had expected but still usable. Just need to get the parking lines adjusted on the stereo now because they're all out of wack!
  18. cdyt7717

    radio reverse wire

    fixed thanks
  19. cdyt7717

    radio reverse wire

    hey guys, a little advice needed. So i bought a new stereo and a backup camera to install. I've had the stereo installed for awhile now and everything works great. The stereo switched to the reverse cam input when I shifted into reverse and all was good. I went to wire up the camera yesterday...
  20. cdyt7717

    Backup cam install

    So I got the camera mounted but not hooked up today, replaced the radiator, and t-stat since it sprung a leak. There was no trimming of the actual tailgate needed, just trimmed the fin on the inside of the black tailgate cover. I hooked up the camera for a sec to test the viewing angle. You can...
  21. cdyt7717

    Backup cam install

    I haven't mounted it yet for that exact reason. To put it there, I'm going to have to cut out part of the top of the tailgate for the back of the cam. Not really wanting to cut anything, but I think besides swapping to the 4th gen handle it will look the best. Still working up the nerve, but I...
  22. cdyt7717

    Bad mods

    worst so far was doing a tranny line pressure booster. Basically, you just wire a resistor in parallel with your pressure sensor, it boots the pressure in the trans and so on. It turned my check engine light on and I didn't like that. When i unplugged the resistor, the original wires ended up...
  23. cdyt7717

    Backup cam install

    I also haven't looked into the tailgate handle cam in the newer models. Would they fit and mount up with the 3rd gen locking mechanisms?
  24. cdyt7717

    Backup cam install

    My PAC wiring harness had a backup remote wire so I just hooked it up to my radio harness. Whenever i put it in reverse, the HU automatically switches to the camera. The wire must already be in the factory harness just not used in my (old) stock stereo.
  25. cdyt7717

    Backup cam install

    Hey guys, so I just got my double din stereo in, its a Kenwood DDX773. It still needs a little sanding and painting, otherwise I am very happy with it. When i bought it, i wanted to option for a back up cam primarily to help with backing up to a trailer while also being able to be used as...

Latest posts

Staff online

Members online

Total: 1,148 (members: 50, guests: 1,098)
Robots: 1,732

Forum statistics

Threads
195,695
Posts
2,873,392
Members
156,569
Latest member
judgebehemoth

Share this page

Top