Search results
-
Tire question
I want to go as large/wide as I can without a lift...I'm really liking the nitto dune grapplers, but it looks like I have to decide between the 285/70/r17 or the 305/70/r17 Any more input on my choice would be greatly appreciated...and thanks for the input so far...glad to know at least one of... -
-
Tire question
I know there are a million of these but it's hard to figure out which answer might apply to my particular setup...I appreciate any assistance...so I have a 2004 dodge ram 1500 4x4 and I plan on doing a 2" tortion level on the front for now. I am getting these rims from a friend Which are... -
-
Rack and pinion
I'm referring to the threaded bushing. I bought an 18 inch pipe wrench. I hope it does the job -
Rack and pinion
Anyone know the size of the back side of the bolt for the rack and pinion mounting? The front is a 24mm but right now the back is moving as I try to loosen it( it's really frozen... Impact wrench isn't getting it off) -
Pulley disintegrated!?
So, I went to the dump today, and on the way, I was noticing a small ticking noise. The dump is about 4 miles away. As we leave the dump, my power steering decides it's tired of doing all that work and takes a break...the noise is louder and I'm fighting to steer to get home...we have to stop...- Rambug
- Thread
- Replies: 3
- Forum: Engine & Performance
-
Crash!!!!!
No. I bought a new one piece bumper for the front and a paintable bumbler for the rear, new grille and new lights -
Crash!!!!!
Not a jack at all. I detest chrome. Lol. Side rails and rims are next -
Crash!!!!!
A few more pics I also bought a bed from a junkyard that doesn't have rust on the wheel wells, but I'm still prepping it for install, weatherproofing it -
-
Crash!!!!!
So...I got in a little fender bender a few weeks back... Thank goodness for full insurance coverage...I decided to make a few changes while I was at it :). Hope you enjoy -
Defroster and heat issue
I know I probably do need a heater core as I smelled the syrup myself, but like I said, the passenger side heat works great...I'm baffled -
Defroster and heat issue
Im hoping someone here might have some insight, so heres my problem as best as I have been able to note thus far. Defroster is WEAK this morning, at 32 degrees it took a full 50 minute drive to get half the fog from the window...HALF Now for the second issue... My heater... for some... -
Can't compress calipers
I'm just about to start the other side. I'll let you know- Rambug
- Post #20
- Forum: General Discussions
-
Can't compress calipers
Is it a bad idea to use anti seize on the lug nuts?- Rambug
- Post #19
- Forum: General Discussions
-
Can't compress calipers
I had to do what gold dot said...if I loosed the bleed valve I was able to compress it, but it really has me worries that something's wrong with the brake lines...- Rambug
- Post #17
- Forum: General Discussions
-
Can't compress calipers
I've tried all that...this isn't my first time doing the brakes. I'm kinda worried that the brake lines might be clogged?- Rambug
- Post #10
- Forum: General Discussions
-
-
Can't compress calipers
Sorry. I am only working on the drivers side at the moment. As I compress one piston the other piston pushes out...if I try to push both pistons at once it won't move- Rambug
- Post #5
- Forum: General Discussions
-
Can't compress calipers
I'm using a c clamp... It's wont compress when I push them at the same time- Rambug
- Post #3
- Forum: General Discussions
-
Can't compress calipers
I'm trying to replace my brake pads on the front and I can't manage to compress the calipers to get them over the new pads. I removed the cap from the brake fluid input but as I compress one side, the other one extends... If it try to place and old pad on the calipers to push them both at the...- Rambug
- Thread
- Replies: 24
- Forum: General Discussions
-
-
Double DIN install?
Hey weed! Sorry bout the wrong name. You inspired me to attempt it on my own and I appreciate that! I like having my hands in all the parts of my truck- Rambug
- Post #15
- Forum: Audio & Electronics
-
Double DIN install?
Yes bondo... The bezel is really easy. There is a video for it on you tube. Search double din ram conversion. A guy named weedwhacker or something like that. I'm at work or is look it up myself- Rambug
- Post #12
- Forum: Audio & Electronics
