Search results

  1. V

    WTT Tires (295/65/20 trail grapplers) or tires and wheels (Near Houston, Tx)

    Weekend bump Sent from my iPhone using Tapatalk
  2. V

    WTT Tires (295/65/20 trail grapplers) or tires and wheels (Near Houston, Tx)

    I have a set of used 295/65/20 Nitto Trail Grapplers with 13/32 tread that I would like to trade back down to a smaller size. I'm leveled and these don't rub at all on my truck. Tires are in great shape and are worn evenly. I love the look but want to go back down to a slightly smaller size to...
  3. V

    Leveling with Bilstein 5100's

    Most people recommend to replace all 4 at once just so that they are all the same age and you don't have them all wearing out at different times. I did it partly for that reason but mainly because of my OCD. Sent from my iPhone using Tapatalk
  4. V

    Exhaust help

    There is no performance increase in going with 5" over 4". The 5" exhaust as stated is much harder to fit without touching/rubbing/rattling something somewhere under the truck. The only difference is that the 5" will be much louder, obnoxiously loud in my opinion. I've deleted a lot of these...
  5. V

    WTT Flowmaster super 10 direct bolt on for something different (south central TX)

    No longer available. Sent from my iPhone using Tapatalk
  6. V

    Leveling with Bilstein 5100's

    The Bilsteins are all that you need to level, however on the 2013+ trucks many guys have had issues of the top ball joint separating from the Upper Control Arm so most guys install Mevotech UCA's at the same time they do the bilsteins just for cheap insurance. At 2.1" you can fit up to 35's...
  7. V

    1211 vs 1223V

    Yes they are. Sent from my iPhone using Tapatalk
  8. V

    1211 vs 1223V

    When I was debating which springs to get I called tuftruck and discussed my needs and other suspension mods and the 1223's are what they recommended to me to fit my needs and I couldn't be happier. Sent from my iPhone using Tapatalk
  9. V

    1211 vs 1223V

    The 1211's add 50% capacity and don't lift, the 1223's add 50% capacity and will lift the truck about 1.5"-2" unloaded. I can vouch for the 1223's. I have them on my truck with my bilsteins at 2.8" and I never sag below level and when unloaded I have just a slight bit of rake, measures about...
  10. V

    Lifted 4th Gen Pics - Show Em Off!

    I think I've posted mine in here before after the level and tuff truck springs but she still had stock rubber. Added some 295/65/20 trail grapplers to it this past weekend. Much better now! Sent from my iPhone using Tapatalk
  11. V

    WTT Flowmaster super 10 direct bolt on for something different (south central TX)

    I have a flowmaster super 10 that I made a direct bolt on muffler replacement for my 2012 Ram 5.7l and I am wanting to trade it for another bolt on kit. This muffler sounds really good I'm just looking to change it up. I'd really like a Carven direct replacement kit but will also consider the...
  12. V

    What did you do with your 4th Gen this week?

    Put on 295/65/20 trail grapplers and changed the oil yesterday. Sent from my iPhone using Tapatalk
  13. V

    B&W hitch forward of center

    I have a B&W in my 2012 1500 crew 5'7" bed. It sits pretty much centered over the axle but it was still too close to my standard size toolbox for comfort so I built an offset ball just like the ones that B&W sells for the short bed trucks. Mine moves the center of the ball 5" towards the rear. I...
  14. V

    Hello, new member, first post with some questions.

    Yeah dash cracking was second gens and early (02-05) 3rd gens. Once they changed the material that the dashes are made of in the 2006 trucks all dash cracking stopped. Sent from my iPhone using Tapatalk
  15. V

    Newbie Tire Request

    I understand completely. Well post pictures when you get them mounted. It will be a while before I can afford new tires so I'm still trying to decide what I like best. Sent from my iPhone using Tapatalk
  16. V

    Newbie Tire Request

    What size did you end up going with? Sent from my iPhone using Tapatalk
  17. V

    upgrading 1500 shocks

    Tuff truck springs are where it's at if you're going to carry weight often with your 1500. I've got the TTC-1223 springs in mine. They doubled as a lift as well. I've got just a slight maybe 1" rake with my bilsteins at 2.8". I've pulled my dads 24ft big bend stock trailer with a couple horses...
  18. V

    Newbie Tire Request

    3 good choices there. Also look into the nitto ridge grappler, it's a new release from nitto and is a hybrid much like he duratrac. I believe it will fit right into the runnings with the 3 you've already listed. If you are staying with the stock 20" wheels I would personally recommend a...
  19. V

    What did you do with your 4th Gen this week?

    Pictures as promised Sent from my iPhone using Tapatalk
  20. V

    Advice on if I should buy a Ram 1500

    I bought mine for $14k and change. It's a 2012 1500 Express crew 4x4 and had just under 75k miles when I bought it in April. I purchased it from the company I work for so I know the vehicles history and know when and where it was serviced for its entire life prior to me purchasing it. I work in...
  21. V

    WTT 20" Express wheels and tires - Huntsville/College Station, Texas area

    I will be driving from my area to port o Connor on Friday of this week if anyone along that route is interested. Sent from my iPhone using Tapatalk
  22. V

    WTT 20" Express wheels and tires - Huntsville/College Station, Texas area

    I understand. Sent from my iPhone using Tapatalk
  23. V

    WTT 20" Express wheels and tires - Huntsville/College Station, Texas area

    Really wanting to just do a straight trade. Don't have any "disposable income" lol. The oilfield hasn't been nice to me this year. Sent from my iPhone using Tapatalk
  24. V

    What did you do with your 4th Gen this week?

    I will get a picture of it for you tomorrow in the daylight. Sent from my iPhone using Tapatalk
  25. V

    What did you do with your 4th Gen this week?

    It's just a universal gun rack made for the back window of a truck. I just used self tapping screws to attach it to the seat frame. Sent from my iPhone using Tapatalk

Latest posts

Members online

... and 16 more.
Total: 1,316 (members: 66, guests: 1,250)
Robots: 1,784

Forum statistics

Threads
195,631
Posts
2,872,756
Members
156,461
Latest member
rainylakeram

Share this page

Top