Search results

  1. L

    5th Gen Cab Lights/Mirros on a 2018 2500?

    Does anyone know if the 5th gen cab lights will fight on a 2018 2500? What about the mirrors?
  2. L

    Operating Temps and Oil Pressure

    I'm running Royal People 5/20 and s Royal Purple filter. About 39k total on the truck. What are the normal ranges for oil, coolant and Oil Pressure. On a 30 mile Highway trip running around 80mph in North Texas at about 80° Coolant: 210° Oil: 222° Oil Pressure: 56psi Oil Temp seems a...
  3. L

    Tie rod end pictures?

    Can someone throw up a picture of their tie rod ends? I put some bilsteins on last weekend and I see metal between the boot and the knuckle. Is that normal? Sent from my SM-G935T using Tapatalk
  4. L

    Bilstein 5100's and Mevotechs on a 2014 CC

    I had the 'pleasure' of installing my Bilstein's this weekend in the driveway of an apartment. While I was in there, I went ahead and replaced the upper control arms with some Mevotechs. All in all, the install went relatively smoothly. The initial measurements were 36 1/8th" Front and 39...
  5. L

    Bilstein/UCA Tool List?

    I am getting ready to install some Bilstein's and Mevotech UCAs, and want to make sure I have all the tools required. Is there a list anywhere? I went to Home depot to grab what I thought I was missing, but want to double check. There's nothing worse than getting halfway through a job and...
  6. L

    Getting the Mevos Ready. Bilsteins go in next weekend.

    Used VHT chassis flat black. Sent from my SM-G935T using Tapatalk
  7. L

    Bilstein 5100 - All 4 out the door for less than $370

    Just a heads up. I bought a full set of 5100's front (ride height adjustable) and rears for $369 out the door (that included tax since they're local). 4WheelParts has them on sale. (with a free 3 year replacement warranty -- not sure if that's standard)
  8. L

    Re-Torquing After Bilstein's

    So obviously, during reassembly, you should torque down the suspension components to factory torque settings. After you take a test drive and let everything get under load for a bit, what requires re-torquing?
  9. L

    Loose Console Lid

    Does anyone else have play side to side on your closed console lid?
  10. L

    36k Warranty - Just took her in

    I just took in my truck at 35980 for a loose console lid, and a sticking parking brake. Anything else I should have them look for?
  11. L

    Ram/Hemi-Specific OBDII PIDs?

    Does anyone have a list or reference for RAM/Hemi-specific PIDs? I'm specifically looking to monitor MDS status through the OBDII port with my OBDLink MX Bluetooth adapter.
  12. L

    OEM Backup Camera Not Working / Black Screen

    I just noticed my backup camera is no longer working (happened today). When the backup camera should be on the screen, it's just a black, blank screen. My 36k bumper to bumper is about to expire (35,681). I plan on taking it in -- just curious if anyone else has experienced this issue.
  13. L

    Dent in Steel Bumper, what are my options?

    Long story short... Low speed back up into a short brick structure corner. My fault. Is the bumper fixable? Sent from my SM-G935T using Tapatalk
  14. L

    What are your stock 1/4mi times?

    Moved to official timeslips sticky... Sent from my SM-G935T using Tapatalk
  15. L

    Used to be a Chevy guy.... no longer

    I've owned Chevy trucks all my life. I recently totaled my 2006 Avalanche and decided to try out a Ram this go around. We recently bought my girlfriend a brand new F150, and while it's a nice truck (nicer than any Chevy I've driven), I'm in love with my Ram. I picked up my 2014 RAM 1500 Big...
  16. L

    Am I Getting Old? Gear Question

    I bought a used '14 crew bighorn 4x4 with the 5.7. Mopar connect says I have 3.21s but reading in here about the huge improvement of 3.92s over 3.21s etc makes me think I may have 3.92s. I have relatively beefy (stock size) BF Goodrich KO2s on her, but a little tap in the parking lot, or a good...
  17. L

    Ball Joint Maintenance

    I change my own engine oil. Do the Ram's have sealed ball joints or do I need to get them lubed every oil change? Any other maintenance I should do every oil change?
  18. L

    Retroshop HID kit in Quads?

    I noticed in their site they offer a kit for quads. Does anyone have experience with this kit in quads? Beam pattern shots? Scatter? Sent from my SM-G935T using Tapatalk
  19. L

    LED Headlight Bulbs: Supernova V.2

    Has anyone tried these? I have a 2014 Crew with quads and I ordered a set for the lows (they also have fogs, but no highs). Everyone here seems to be using OPT-7 or similar but I haven't seen any threads or mentions of these. They come with the CANBUS adapters too which was nice...

Latest posts

Members online

... and 53 more.
Total: 1,557 (members: 103, guests: 1,454)
Robots: 1,701

Forum statistics

Threads
195,703
Posts
2,873,522
Members
156,584
Latest member
Willwr89

Share this page

Top