Search results

  1. CumminsCrazed

    2010 2500 axle u joints

    Hey guys, just wondering if anyone has found a new style spicer axle joint that will work in the 10+ trucks. The 5006813 joint is too small for these and id really prefer to run a spicer joint in the truck is possible. If anyone knows anything please let me know.
  2. CumminsCrazed

    Out with the old....In with the new.

    Well guys, a year ago i bought a new (to me) truck, 2010 Ram 2500 fully loaded. ive come to find out that i havent posted any pictures of it on here yet. Shame on me, anyway, ill start with one picture or 2 of my old truck i sold and throw a half dozen or so pictures of my current 2010 i have...
  3. CumminsCrazed

    Help finding and interior piece

    hey guys i recently found out my truck has a broken cover on the drivers side outer seat bolt mount. Ive tried searching high and low for this piece but i cant seem to find it anywhere. Anyway, heres a few pics i snapped of exactly what i need as its hard to explain through just text. Also...
  4. CumminsCrazed

    Joining 4th gen crowd in a week

    hey guys, i just sold my 2001 2nd gen 6 spd cummins last night, buying a 2010 crew laramie next weekend. Just looking for any info on them that would be new to me as far as going from an 01 to a 2010 My new truck does have the 68RFE trans which is a whole new game to me beings ive owned a...
  5. CumminsCrazed

    first time pulling - looking for advice/set up.

    hey guys, im gonna hook for the first time next sat locally and im just looking for advice on what to do the best i can do with my set up as well as how to set the truck up for next weekend. Heres what i have for a list so far done to the truck Edge COMP hot unlock SBC SDD3600 dual disc...
  6. CumminsCrazed

    Turbo gurus - need help on choosing right turbo

    hey guys, ok so its definitely turbo time for my truck, and i know i want to go with an Industrial Injection turbo. Just not sure which one is right pick for me. Heres what currently done to my truck as well as what i may do in future and what i plan to do with the truck. Its a 2001 HO 6 spd...
  7. CumminsCrazed

    Time for a turbo rebuild....or new turbo? (long read)

    So my truck has had a burnt oil smell from the exhaust since December. I didn't find out about the smell until i had gotten my truck back from having a head gasket replaced along with studs, o rings, exhaust porting etc etc and was unsure where i was using oil at. Well it didn't seem that bad...
  8. CumminsCrazed

    Timing Rattle noise?????

    Hey guys, im borrowing a friends smarty for a week or so to see how i like it stacked with my edge Drag Comp box and my 7x0.011 (150) injectors. I set Smarty on SW#8 and adjusted the torque management to 6 which is highest setting, meaning very little torque management is applied to engine...
  9. CumminsCrazed

    truck acting up on start up

    Hey guys, it seems like my truck is wanting to try to start nickel and diming me. I had Chris Snyder do a head gasket and some head work last week, which he did an awesome job with. Anyway, yesterday i went to go eat lunch and when i came back out about 40 or 45 min later and got in my truck...
  10. CumminsCrazed

    uh oh...head gasket time

    well guys as the title says, its time for me to get a head gasket. truck started leaking oil from the front of the head about a week ago. not leaking horribly bad, but once the engine warms up and oil thins out itll leak probably about a 4x6 postcard size spot within about 5 mins of turning...
  11. CumminsCrazed

    hot EGTs for short times??

    hey guys, just wondering how bad it is on the truck if you get it hot for 4-8 seconds at a time randomly. i was toying around with a custom turbo rabbit diesel tonight and i accidentally let my EGT's get to at least 1600 deg for no longer than 5 or 6 seconds. Just hoping didnt do any damage...
  12. CumminsCrazed

    checking for boost leaks?

    hey guys, so last Wednesday i put a new intake horn on my truck, replaced intake grid heater top and bottom gaskets that were supplied with intake etc. anyway, on thurs and fri i started noticing a "different" sound when i started building boost, wasnt sure if it was normal with new intake horn...
  13. CumminsCrazed

    First try at Plasti-Dip.......

    ok so if you've been following my previous post about asking where to buy plasti-dip at you more than likely read how yesterday went as far as giving it my first try. If you have not followed it, here a link, last post on 3rd page or post #22 is my description of yesterday...
  14. CumminsCrazed

    Looking for vinyl decals....

    hey VD, im starting a truck club up here, and we have a few ideas on names/logos etc but were still in thinking process, just wondering if you could give me some ideas on decals when i throw some ideas at you. maybe help me throw together a badass looking decal for the club. thanks!
  15. CumminsCrazed

    vinyl decals?

    hey Jim, do you do vinyl decals? if so i have some ideas for a local truck club im starting up. id like to see what you can do with the ideas i throw out at ya
  16. CumminsCrazed

    PLasti-Dip..........where to buy?

    ive been looking everywhere for plastidip and i can not find it ANYWHERE. im ready to start coating my truck BUT i cant find it anywhere to buy it......
  17. CumminsCrazed

    turbo upgrade??????

    hey guys, i have a buddy who has a BD super B single hes willing to part with. Im considering buying it IF itll make a decent difference in my truck. my current set up mainly for power is a hot unlock edge comp, 5" pipe, fass fuel system, air intake etc. He said he would sell me the turbo...
  18. CumminsCrazed

    make mw a new sig?

    anyone wanna make me a sig using the pics from the show in illinois? i know JJ has way better quality pics than me
  19. CumminsCrazed

    Craftec tonneau covers

    hey Dave do ya have access to craftec brand tonneau covers?? if so what a price on a black cover for 73-87 chevy/gmc short bed pickup
  20. CumminsCrazed

    radiator removal and de-oiling - overflow bottle relocate?

    hey guys, just wondering what the best was to remove the radiator from my truck is and how i should go about degreasing - or should i say deoiling my radiator from all the oil thats come out of overflow bottle and been thrown everywhere by engine fan. Im sure as bad as my radiator is its going...
  21. CumminsCrazed

    uh oh!!!! issues!!!

    ok guys, so this morning i went to leave for work and i started my truck like always except i found out that NONE of my dash gauges were working and almost all my dummy lights came on, also, the odometer window read "no bus" i also noticed later on the way to work that everything except the...
  22. CumminsCrazed

    Pics with new wheels/tires (56k warning!!!)

    ok guys, first of all, id like to thank Dave at DB Truck Customs for an UNBEATABLE price on my MHT Fuel Boost wheels and thanks to Discount Tire Direct for an awesome price on tires. At the same time i also added a set of Top Gun Customz longer control arms to re center my front axle as well as...
  23. CumminsCrazed

    New Control Arms!!

    well guys, got my second 2 tires delivered yesterday (4/24) and i got my new Control Arms delivered today. So now all i gotta do is install new control arms and get truck aligned then get the new tires on my truck. So anyway, heres just a few pics of the new Control Arms, their for a 00-02...
  24. CumminsCrazed

    Teaser pics of Wheels and tires!!!!

    ok guys, i took some time today and mounted my 2 wheels and tires i have on my truck, OEM lug nuts wouldnt fit so i couldnt actually set it on the ground, but the truck was jacked up on jack stands @ ride height. Anyway, heres some pics i took as somewhat of a teaser for you guys of what to...
  25. CumminsCrazed

    Car show in Mason City Iowa on May 26th 2012!

    Anyone in the area, my local car club im a part of is hosting our annual car show on may 26th 2012 in Mason City. Theres normally over 200 vehicles that register and the truck classes arent generally very full. Anyway, heres a link to our flier and hopefully someone/a group of you would like...

Latest posts

Members online

... and 3 more.
Total: 1,316 (members: 53, guests: 1,263)
Robots: 1,795

Forum statistics

Threads
195,654
Posts
2,872,987
Members
156,503
Latest member
Nopak1981

Share this page

Top