Lift Recommendations

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BigKoach

Junior Member
Joined
Aug 30, 2023
Posts
4
Reaction score
1
Location
Atlanta
Ram Year
2022
Engine
5.7 Hemi
I recent bought a set of 24x14 rims wrapped in 33x13.5x24 tires. I’m looking for recommendations on the best lift brand and height for my ‘22 2wd Big Horn. Don’t want to go over 6in lift if I don’t have to. 4-5.5 would be idea height without too much rub
 

mrack

Senior Member
Joined
Feb 14, 2023
Posts
296
Reaction score
354
Location
Michigan
Ram Year
2016
Engine
5.7
You don’t need any lift to clear 33s. Most these trucks come stock with 33s
 

crazykid1994

Senior Member
Joined
Sep 21, 2013
Posts
5,041
Reaction score
4,969
Location
Florida
Ram Year
2017
Engine
Hemi 5.7
That wide of a tire may rub when you turn not matter what. Otherwise 33s should fit fine. I would just start with a 2 or 3” lift. @Nick@GotExhaust does eibach offer a 5th gen setup? Front and rear springs. A 3/1 setup should be fine with those tires but may still require a bit of trimming
 
OP
OP
BigKoach

BigKoach

Junior Member
Joined
Aug 30, 2023
Posts
4
Reaction score
1
Location
Atlanta
Ram Year
2022
Engine
5.7 Hemi
That wide of a tire may rub when you turn not matter what. Otherwise 33s should fit fine. I would just start with a 2 or 3” lift. @Nick@GotExhaust does eibach offer a 5th gen setup? Front and rear springs. A 3/1 setup should be fine with those tires but may still require a bit of trimming
Thanks for your help
 

mrack

Senior Member
Joined
Feb 14, 2023
Posts
296
Reaction score
354
Location
Michigan
Ram Year
2016
Engine
5.7
Yeah what he said, depending on your wheel offset you’ll probably get some rub on the inner fender, possibly the bumper or frame also. I had 37x13.5 on my truck when it was stock once for kicks and giggles, I was shocked how well they fit. Only a little rub on the bumper, if I trimmed that a touch I probably could have gotten pretty close to full lock. Obviously you should have a lot less issues with a 33”. I’d throw a set of bilstein 5100s in at 2.1” to level it and and go from there.

Edit: forgot you have a 5th gen, not sure how the clearance compares. I’d still start with bils though
 

Nick@GotExhaust

Senior Member
Preferred Vendor
Joined
Aug 1, 2017
Posts
6,846
Reaction score
5,494
Location
SC
Ram Year
2017
Engine
6.4
Eibach does make a kit that will lift 1" in the rear and up to 2.75" in the front.

Maxtrac also makes a 4" kit

Message me if you would like a quote on anything
 

crazykid1994

Senior Member
Joined
Sep 21, 2013
Posts
5,041
Reaction score
4,969
Location
Florida
Ram Year
2017
Engine
Hemi 5.7
Thanks for your help

Eibach does make a kit that will lift 1" in the rear and up to 2.75" in the front.

Maxtrac also makes a 4" kit

Message me if you would like a quote on anything
There you go OP. I would message nick for a quote. Any higher with the 33s and it’ll look like you skipped leg day
 
Top