Rear spacers

[jknappen]

I see all these guys running rear spacers when running level kits bilsteins etc. what is a popular good quality .75 to 1 inch rear spacer and what does it take to install them?

 

[AustinB]

Top gun customz would be the most popular

Takes about 30 mins of your time once the wheels are off.


IMO

 

[AustinB]

If you're patient. And really going to go forward with this, I will give you some 3/4" spacers for the cost of shipping, next week.

Otherwise I will give them to someone else that needs some.


IMO

 

[jknappen]

If you're patient. And really going to go forward with this, I will give you some 3/4" spacers for the cost of shipping, next week.

Otherwise I will give them to someone else that needs some.


IMO

Sounds good ill take them.... Thanks

 

[AustinB]

I'll send you a pm monday or tuesday.


IMO

 

[jknappen]

I'll send you a pm monday or tuesday.


IMO

I will be looking for it

 

[JExpress14]

How's the quality of the topgunz read spacers I'm thinking about pulling the trigger on the 3/4" steel ones.

 

[sausec17]

I used 1.5" TGC steel spacers for about a year. Very nice quality. I would recommend them.

 

[AustinB]

I think its safe to say that when it comes to rear spacers.. There probably isn't a bad quality. You're shopping for price and customer service.

A lot of people run and recommend TGC spacers. The only complaints would be that some claim that the steel ones cause "squeaking" noises and counter that with the poly material (like I have).

There are also guys with steel that claim zero noises.


IMO

 

[sausec17]

If you use the steel rear spacer you are suppose to re-install the spring cushion which is basically a 1/4" rubber spacer. That removes the chance of any squeaking.

 

[JExpress14]

If you use the steel rear spacer you are suppose to re-install the spring cushion which is basically a 1/4" rubber spacer. That removes the chance of any squeaking.

So are you saying to remove the factory spring isolator slip the spacer in then put the isolator on the spacer?

 

[sausec17]

So are you saying to remove the factory spring isolator slip the spacer in then put the isolator on the spacer?

Correct.