62Blazer
Senior Member
Installing towing mirrors on my '16. The ones I bought have the option where they have running lights in them (basically the turn signal light will come on with the headlights). However you have to run a new power from the mirrors, out the doors, and into the cab of the truck. I have the wire through the wiring loom between the door and A-pillar, but can't get it fed through the opening in the A pillar to inside the cab. This is where the factory harness feeds inside the cab. I have the wire feeding through the connector at the A pillar as shown in the directions, but the issue is you can't access this location from inside the vehicle. Between the multiple layers of sheetmetal and the parking brake mechanism I can't see the wire or the opening, or get ahold of the wire from the inside to pull it through. Of course the install videos on YouTube make it look super simple, but basically skip that part (Boost Automotive and several other places have videos). The other aspects of installing the mirrors is super easy....probably less than 15 minutes per side minus that stupid wire.
Any advice?
Any advice?