-
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.Im going to go with the cummins rebuilt tranny with the hemi bellhousing from Lazar smith. He has a lot of the other little things i... -
907powerwagon reacted to BlackGold6.4's post in the thread swap my 66RFE for a G56....cost? with
Like.
If you go with a stock G56 I would recommend a 2005-07 due to it's gears or if you want more street then truck manners then go with the... -
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.Nothing yet. Just trying to source some parts and figure out which path I want to take (stock hemi G56 from a 3rd gen vs rebuilt g56...
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.So HP is just the software portion of it correct? Is there a preferred hardware to use? I assume you need a computer program and then a...
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.Additionally, for consideration of just using the hemi g56 from the 03-08 trucks, I came across this clutch setup after some reading of...
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.Any of you guys know of any places to find a potential g56 core? I’ve been looking through junkyards, car-part, Facebook, etc., just...
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.Sounds like I’ll be using HP then! Thanks for the insight!
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.Still putting together ideas right now but I imagine I will start the process after the holidays. I have my daily to drive so it’s not a...
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.Im not 100% on any of this haha. Im just trying to get as much research done as possible before attempting it!
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.update again after talking to jerry and rick at tapped. Rick informed us that you actually only need to perform the unlock on the pcm...
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.I did talk to Jerry at Tapped performance about the tuning aspect of this. The 6.4 manual combo was offered on trucks in canada and...
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.Just for clarification, you could absolutely just take the manual transmission that came in the 5.7 hemi and use it behind the 6.4 with...
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.If you use the g56 that came with the hemi's then yes, I believe everything would be normal, however, lazar uses the g56's that come out...
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.The only other thing that mike at lazar was telling me was that with the different input shaft and bellhousing of the 5.7 g56, is that...
-
907powerwagon replied to the thread swap my 66RFE for a G56....cost?.Yeah i found the bellhousing upper portion on ebay. All i gotta to is give that and a g56 tranny to lazar in texas and he'll change the...
-
-
Loading…
-
Loading…
Members online
- Ggrimes356
- RDHemi16
- PolarisCobra
- Andy606Andy
- Mike Flea
- Wild one
- NosterCoaster
- Kid's HEMI! !!
- Steve Oliveira
- DOlds
- SniperDroid
- Tony81089
- Mr_Ames
- RamDiver
- 2014 Longhorn
- Farmer Fran
- Daniel Ortiz
- Travis8352
- stvbldso
- frank1823
- FJ Mike
- John Mancino
- dieselscout80
- Ole Buck
- shmedley
- MJE1
- Jeepwalker
- Abrams117
- Dredger
- yohan1234
- DynaBro
- WildcatJoe
- olyelr
- Sdpadrez
- Zoe Saldana
- odinjunior
- Baja1
- Nigel Hoffman
- Stangboy101
- Jlexbak
- MoparMan_21
- Ramrt345
- 18CrewDually
- Kendig83
- BeardyMcBeardface
- Rodp84
- Prbiggs
- Dean2
- jawzs2
- andrea64