BlownGP

BlownGP

Senior Member From Houston/Baton Rouge
Joined
Last seen
Posts
6,009
Reaction score
1,505

Latest activity Postings About

    • BlownGP
      BlownGP replied to the thread OIL FILTER RELOCATION.
      Yes good idea. I think I would want to that anyways. Those push the lock fittings don't look very good. I wanted to do this on the...
    • BlownGP
      BlownGP reacted to Wild one's post in the thread OIL FILTER RELOCATION with Like Like.
      Khris answered the question already,but pretty well every engine measures oil pressure "after" the filters,not before,so a pressure...
    • BlownGP
      BlownGP reacted to crazykid1994's post in the thread OIL FILTER RELOCATION with Like Like.
      The 1127 and dual that wild one runs both need upgraded AN lines. The rubber hoses and worm clamp fittings are garbage. Wild one and I...
    • BlownGP
      BlownGP reacted to Wild one's post in the thread OIL FILTER RELOCATION with Like Like.
      It was one guy who had a leak,and it was from a poor casting,but upgrading to -10 (5/8") lines and fittings sure doesn't hurt. Transdapt...
    • BlownGP
      BlownGP reacted to crazykid1994's post in the thread OIL FILTER RELOCATION with Like Like.
      Transdapt 1127 is the single filter which is what I run. if he hits that filter he has way more problems. Especially with the...
    • BlownGP
      BlownGP replied to the thread OIL FILTER RELOCATION.
      I remember from old old post that model leaks unless you upgrade the lines and fittings.
    • BlownGP
      BlownGP replied to the thread OIL FILTER RELOCATION.
      That is a nice setup.. Guess I will look into it because I hate the stock location. Makes a ******** mess everytime.
    • BlownGP
      BlownGP reacted to Wild one's post in the thread OIL FILTER RELOCATION with Like Like.
      If you decide on a remote mount,spend a few minutes with a die grinder porting and rounding off the sharp edges in both the engine...
    • BlownGP
      BlownGP reacted to Wild one's post in the thread OIL FILTER RELOCATION with Like Like.
      Yes they do.I started with a single then upgraded to the duals,i won't go back to the single,as my pressures are actually higher with...
    • BlownGP
      BlownGP replied to the thread OIL FILTER RELOCATION.
      Do they have one with a single filter. Not sure if if I need dual filters. Does that dual filter one effect oil pressure?
    • BlownGP
      BlownGP reacted to Wild one's post in the thread OIL FILTER RELOCATION with Like Like.
      https://www.summitracing.com/parts/trd-1227
    • BlownGP
      BlownGP reacted to Wild one's post in the thread OIL FILTER RELOCATION with Like Like.
      The front bumper / tow hook mount and front crossmember are lower then they are,you bust off the tow hook mount or smash the crossmember...
    • BlownGP
      BlownGP replied to the thread OIL FILTER RELOCATION.
      What's kits are you guys using?
    • BlownGP
      BlownGP replied to the thread SLT to Sport Bumper conversion.
      So, finally did the swap. Was going to wrap it black or paint the chrome but man the sport bumper just looks so much better. Plus...
      • Oh8iBLXUweZwyOHEemYF5X4MT=w1063-h797-no?authuser=0.jpg
      • TVNHrQOzFO-q0JLLeLYJIQ0v6=w1063-h797-no?authuser=0.jpg
      • m0bB_FI9K0bDreUcLttg02fei=w1063-h797-no?authuser=0.jpg
    • BlownGP
      BlownGP reacted to 07MegaCabRam's post in the thread OEM fender flare Tape Size with Like Like.
      1/4 is what you need. Get the THIN stuff too. A few tips as I've gone through this a few times. If you can, get yourself an eraser...
    Show older items
  • Loading…
  • Loading…

Latest posts

Members online

... and 1 more.
Total: 722 (members: 51, guests: 671)
Robots: 1,045

Forum statistics

Threads
180,386
Posts
2,679,727
Members
133,014
Latest member
Blade57

Share this page

Top