Clarks Customs
- Posts
- 10
- Reaction score
- 2
Latest activity Postings About
-
-
Clarks Customs replied to the thread What Brand are these Lifters.The OEM lifter numbers installed on this build are as follows: Front: 5038785AD Rear: 5038786AD Camshaft installed: Melling #1411 (OEM... -
Clarks Customs replied to the thread What Brand are these Lifters.aszumilo, Thank you. I had no clue about these lifter numbers. These were the lifters that I removed from my Ram after purchasing from...
-
Hey guys, I have an interesting issue and am working on how to diagnose the issue. Any help would be appreciated! I have a 2011 Ram 1500...
-
Clarks Customs replied to the thread HELP!! 09-18 Headlight Replacement Confusion.Mrack; thanks for the reply and the clarification. I think this information will benefit a lot of guys on this forum, as it has for me.
-
OK, let me start by saying that the OEM headlight swaps between 09 and 18 are too confusing. I hope this tread sheds some "light" on...
-
Does anyone know if the OEM piston rings (68046210AB) for the 5.7L Hemi are steel, or ductile iron? Are the compression rings...
-
Does anyone know if the OEM piston rings (68046210AB) for the 5.7L Hemi are steel or ductile iron? Are the compression rings...
-
Clarks Customs replied to the thread tick, yep, again, another.It sounds more like a lifter. If you have a stethoscope (you can get a cheap one at Harbor Freight) place the probe on the engine block...
-
-
Loading…
-
Loading…
Latest posts
-
INFO - 2013-2018 8.4A /AN FW Notes (RA3/VP3-NA & RA4/VP4-NA & UAx)
- Latest: OasisNinjaBat
-
-
-
-
Staff online
-
G-Ride990Administrator