Recent content by CoreySinger

  1. C

    Bed rail question

    Cera-kote wipes. Do some google fu on them. Will restore plastic back to black like no other product.
  2. C

    Baja Design Squadron Fog Lights

    I plugged right into the bulb plug. This is instead of running power to a new switch and then to the relay.Found the right plug pigtail on Amazon. I made an adapter for the driver side and a plug for the empty passenger bulb spot.
  3. C

    Baja Design Squadron Fog Lights

    Mine are on a separate harness. I plugged into the factory fog plug for signal to the relay. This way I use the factory switch. Also set to led with alpha. The relay buzzed otherwise.
  4. C

    AlfaOBD

    Ramking, your truck most likely doesn't have the factory Drl wire to the fuse box. The reflector light never had a dedicated drl circuit.
  5. C

    Bighorn bumper mounted light bar

    Here is the view of my light mounting from behind the front bumper. Not plug and play. Cutting and welding involved. I never took the bumper off tho. I realize this doesnt help you mount that light bar you already have. Just for anyone else. Ive never seen 3 pods in these holes before I...
  6. C

    Bighorn bumper mounted light bar

    :( I knew that would be requested. Sorry. I had thought about going out to the garage and taking some pictures. I'd have to removed lights actually get a picture of the mounting. Do you know how hard it is to line three lights up evenly in that tight space. Lol What I did was weld a piece...
  7. C

    Bighorn bumper mounted light bar

    I didn't want to cut the face of the metal bumper and wanted more than the DD lights like above. I trimmed up some of the metal behind the bumper to get 3 pods in the tow hook holes. Rigid hyperspots for long range rural night driving. The Bajas blow the Rigids away tho. The Rigids blow...
  8. C

    Fix my ride!

    I got up in there with a small 90 degree cutoff wheel and cut the welds to remove the cup. Not too bad. Had the rear jacked up for some room in between the suspension parts. Riding on the bumpstops will never be smooth riding. I am almost tempted to trim the front bumpstops on the struts...
  9. C

    Step removal question

    Try some of the barbed push in tabs that hold stuff like the wheel well liners in place.
  10. C

    Fix my ride!

    Did you get the full belltech kit? It came with bumpstops for the front of a 2wd. They look like what you posted but about an inch and a half thick. There is no way to put a nut on. The hole is captured by the mount on the frame. Rivnut is the answer there. I think the control arms will hit...
  11. C

    Fix my ride!

    If you have the helper air bags, cut the bumpstops out completely. Get rid of the metal cup that holds the foam. Get rid of the foam.
  12. C

    will 22x10 rub?

    They fit. Barely. Real close to rubbing the upper a arm on the sidewall
  13. C

    Looking to get 22" hellcat replica wheels, sizing help?

    This is a srt10 rep in 22x10. Same size same offset. 305/45/22. Belltech 2/4. I have 10000kms on them. No rubbing of a upper a arm but its real close. A crazy hard corner may let the sidewalls flex to make contact. I doubt they would ever wear through tho. They do rub the front swaybar at...
  14. C

    AlfaOBD

    JOEL N MICHAEL Rear Lighting DTC Disable: Not set Try changing this..
  15. C

    Morimoto xb tails

    My truck never had factory led tails. I did use alfaobd to put led in the rear before getting the Morimotos. I disabled the light out warning detection with the phone app. Truck is a 2018.
See more

Latest posts

Members online

... and 14 more.
Total: 1,280 (members: 64, guests: 1,216)
Robots: 1,809

Forum statistics

Threads
195,690
Posts
2,873,346
Members
156,563
Latest member
RAMET

Share this page

Top