-
-
J-13GTP replied to the thread Anyone have a guess what this sound is?.Honestly sounds normalish for a hemi. These motors are known to be noisy but could be the beginnings of cam/lifter failure. However I... -
J-13GTP replied to the thread Oil/Valve lifter issues..Update: Slowly getting the truck back together and started cleaning the pushrods. Found that one intake rod was bent for sure with...
-
J-13GTP replied to the thread 2016 5.7 lifters loud after replacement.What Ken said. If you didn't get OEM Lifters then your probably going back in. This forum has multiple threads of cheap aftermarket...
-
OEM Mopar lifters? Or Johnson MDS delete? Because everything else has a reputation for needing to be removed and replaced immediately...
-
J-13GTP replied to the thread Oil pressure too high... Engine shut off on me once.Just to beat a dead horse I have the very same pump, didn't change the spring it runs a little more then "normal pressure". It has on...
-
J-13GTP replied to the thread 2017 Start up issues.I would start with the basics. Since you have only had the truck for 4 months I would get your battery checked at your local parts store...
-
J-13GTP replied to the thread Do these lifters look Legit? Real Mopar? What do the Hemi Gods think?.Yep. I had to learn the hard way wish I had just spent the money up front. Bought a set of cheaper enginetech lifters from rockauto and...
-
J-13GTP replied to the thread Stumped. Will not start..The first time I had mine apart I got everything back together and kinda running. No power and didn't want to pull itself. Sounded...
-
J-13GTP replied to the thread Oil/Valve lifter issues..Got the cam out. Not sure how to feel about it. Looks like some spots are more worn the the others. It's like I can see copper or brass...
-
-
J-13GTP replied to the thread Next steps/2nd opinion.Skies the limit and all options are open. Alot of this is going to depend on what kind of budget you have and or how mechanically...
-
J-13GTP replied to the thread Oil/Valve lifter issues..So bit of an update. Ive started tearing the engine back down. A coolant leak and the tick problem has finally drove me to it. So far I...
-
J-13GTP replied to the thread Strange coolant leak. (Timing cover/Water pump bolt).You are correct. After cleaning and more poking around I found that the coolant was traveling down to that bolt. Its been leaking around...
-
J-13GTP posted the thread Strange coolant leak. (Timing cover/Water pump bolt) in Engine & Performance.Got a strange coolant leak. Been chasing this for awhile and finally cleaned up the block to trace my leak down. I did cam/lifters some...
-
-
Hey Guys. Well I seem to have the worst luck. I was removing my intake and damaged the the quick connector for the fuel line. So now I...
-
J-13GTP replied to the thread 2018 Ram 2500 6.4 hemi slt weird rattling noise.WOW. This shop shouldn't doing trans work if it doesn't know what to put in it. How did you know that it was the wrong fluid?
-
-
Loading…
-
Loading…
Members online
- A child of God
- Wild one
- Brandenton
- Phattoe
- Daviddnv
- pcorssmit
- AgeBrown
- dakotakid846
- harv99
- rpowell911
- Brunoxp
- zakman14
- simplyal
- MorrissCatry
- YammyMonkey
- RL jones
- fireflymedic
- Wiz3rd
- Daw14
- BaseLayer
- svoking
- Rob Levesque
- darcfyre
- u2slow
- Barr2255
- Beltsand
- lesmir300
- JeffK
- gt8684
- Prlucho
- Buddy
- max2bob
- jlgomez10
- ddempsey
- shogan
- CBake
- gevans58
- metalmike2016
- tilemaster
- Jmdwifi
- Luisp22
- Black-Wolf
- Treburkulosis
- FJ Mike
- DILLIGAF
- joesstripclub
- caulk04
- PA Ram
- AlCorr
- John Jensen