Pyromed42
- Posts
- 24
- Reaction score
- 59
Latest activity Postings About
-
-
Pyromed42 reacted to Wild one's post in the thread Noob needs help 6.4L possible lifter and cam with
Like.
A figure 8 pattern is good.Emery cloth works,but i usually have wet/dry 320 grit in big sheets,and my emery cloth is only 1" and 2"... -
Once you get the block drained,you could carefully fill it up with a bunch of CLR and let it sit for 24 hours,then flush it with...
-
Pyromed42 replied to the thread Need Input.I pulled passenger side. It came out pretty good. I the use syringe and withdrew all the coolant I could see from top side. There was...
-
Depending who you listen to,you're not supposed to soak the Hemi lifters.I did on my truck,but that was close to 10 years ago,i'm not so...
-
-
My $0.02....... it may be a better experience overall for a new crate engine at this point. However, the experience of really getting...
-
Pyromed42 replied to the thread Need Input.May end up with a new motor after all.
-
Pyromed42 replied to the thread Need Input.@Wild one Started on block and found this. Assuming it the coolant passage and was blocked. 1st pic is location. 2nd pic is what...
-
-
I use these Felpro intake gaskets ,way cheaper then OEM,and i honestly can't tell a differance between them and the OEMs,other then...
-
I wouldn't worry about it,clean the inside of the rail though,i spray a bunch of Brake Clean inside every hole,then blow the rail out...
-
Pyromed42 replied to the thread Need Input.Is this of any concern on the fuel rail? This is after I sprayed little cleaner on rag and wiped it off.
-
-
Pyromed42 replied to the thread Need Input.Quite impressive how much carbon was inside the injectors. I will never pay for "fuel injector cleaning" again. Thanks
-
-
Pyromed42 replied to the thread Need Input.Really digging the cams from here. The hellcat sounds pretty good.
-
Pyromed42 replied to the thread Need Input.Well gents... Went to dealership to get price on parts..... their in person price was retail. It would have been cheaper to order...
-
Check out FRP,they'll put a canned tune in your pcm for alot of their in house cams. Phone them to find out more,and ask them about...
-
-
Loading…
-
Loading…
