So it could be a problem with the level sensors?
I’m just trying to find a band aide that will keep it running for another year till it’s paid off then I can afford a conversion.
My trucks air ride suspension is having issues.
Currently it’s dropped but won’t lift because it believes I have a too heavy load on it.
I’m thinking the sensor may be bad.
Anyone know the part number for that sensor? Or is it part of another system. If so which?
Usually my truck only has...
Would a system like this work for this?
RIH Pneumatics Compressed Air Double Filter & Regulator, Air Drying System, Air Compressor Water Separator, Semi -Auto Drain, Poly Bowl,0-150 psi Gauge, 5 Micron Brass Element (3/8"NPT) https://a.co/d/ehNhWoP
I soooooooo want the factory performance cai with the sport hood attachment. I don’t know why but I have a thing for functional stuff, and having the hood scopes actually be scopes would make me happy, but a 1000$ upgrade to make my brain happy just isn’t in the cards.. so want it tho.
if...
Update:
Connection to third brake light wasn’t good, so now it works, brake works, the only thing that’s annoying now is the blink of red it does before each sequence but not sure I can fix that.
Thanks everyone that helped
Red - running light
white - brake
yellow-turn
green-turn
black - ground
hooked to battery and ground each does the right thing.
And from what I’m being told you can’t wire it this way, because there isn’t a wire separate for brake?
and as I tried hooking it to the third brake light wire...
I had turn signals, but brake turned them both on and not separate brake.
And mine doesn’t have backup lights. It has one it call running lights. Which I guess is suppose to be like the dimmer lights, I’m going to hook that up as the backup.
Does the turn signals require the brake wire to work?
I just unhooked brake light wire (white) and hooked it to third brake light wire (white/purple) and now I have nothing. So I’m guessing it’s not that simple...
That wire I just found out is for wiring up a third light on a bed cap. So I think it should work for what I need. I’ll try it and see what happens, when I get a chance.
I might have to try that wire if I can find it, what type of lighting/electrical problems could surface tapping into that white/purple wire?
and is that wire in the harness for 7 pin?
Yes although it’s not as the ad shows, I have it correctly hooked up
yellow and dark green are turn signals
White to white for brake
Black to brown for ground
Red is backup or driving light
Currently wired to 4 pin like this
black -brown
Yellow (there blue) to yellow
Green - green
White (yellow in there diagram) to white
Ok now I noticed their colours aren’t the same listed gotta check to see what each does to see if it’s hooked correctly.
Video in link of how it should work (and does when I just hook it to battery.)
C$ 24.31 40% Off | OKEEN Car LED Pickup Arrow Red LED Flowing Yellow Turn Signal Lamp Scanning Brake LED Light Bar 100cm Reverse Tail Light Strip https://a.aliexpress.com/_dZZ4pku
It has run/reverse (it fills in lights one at a time, would use as running, if I hook it up it would be reverse)
it has brake/reverse (it blinks 3 times then stays on as a brake)
the turn signals are sequential but blink once then constant sliding over, but hooked up currently it blinks and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.