Recent content by tjkoen01

  1. tjkoen01

    LED Upgrade in Projector Housing?

    I bought these for my low beams last May and love them. Immediately upgraded with driving lights to match. HIKARI 2020, 9012 HIR2 LED Bulbs, +150% Brightness, +100% Extra Night Visibility, TOP XHP50.2 LED, Halogen Replacement 6000K Cool White, Foglight...
  2. tjkoen01

    Exhaust Cut-Outs using Exhaust Brake Button

    The 2 switches on the left are for 4 wheel lock and 2 low (the push button enables/disables the system, the other selects 4 lock or 2 low); the other two allow my dash cam and power outlet in the console to be switched with the ignition or always on, or off. I need to add another soon for my...
  3. tjkoen01

    Exhaust Cut-Outs using Exhaust Brake Button

    Here is what I did for mounting switches in my truck; side of the center console. The panel is removable to drill the holes or replace if you get rid of the switches or want to reconfigure it later. Sent from my iPhone using Tapatalk
  4. tjkoen01

    Best highway or all season tires

    Got them at a local shop here in Louisville. 275/60R20’s. That price includes a $70 rebate Cooper was running at the time. Actual price was $783.22. Sent from my iPhone using Tapatalk
  5. tjkoen01

    Best highway or all season tires

    Cooper Discoverer AT3 4S. 65k tread warranty, reasonable price (paid less than $800 on the rim and out the door), made in USA. Sent from my iPhone using Tapatalk
  6. tjkoen01

    Emergency Brake design sucks... any upgrades?

    I won’t lie, I had a difficult time getting it back together without the axles in place. Kudos to those that did it without removing the axles! Sent from my iPhone using Tapatalk
  7. tjkoen01

    Emergency Brake design sucks... any upgrades?

    I’ve had the opportunity to get to work on the ebrakes on my truck recently due to the friction material separating from the shoes. I ended up pulling the axles since the rear diff fluid needed changed too. No way I could have done the job without pulling the axles; every was rusted together...
  8. tjkoen01

    Dealership has no idea what’s wrong - Help!

    I’ve heard similar noises that were the HVAC system shutting down. I think it is the dampers going to their home position. Sent from my iPhone using Tapatalk
  9. tjkoen01

    Dealership has no idea what’s wrong - Help!

    I also have a Fluke 755 (I think that is the number) it reads 0-20mA, but the clamp won’t fit. Sent from my iPhone using Tapatalk
  10. tjkoen01

    Dealership has no idea what’s wrong - Help!

    I have a Fluke 376 (high end DC clamp meter) and it is only ready down to a tenth of an amp, not sure that is enough resolution to pull this off. Also, my truck has more than one lead coming off the battery so it is impossible to get all of them into the clamp. Could rig something up if need be...
  11. tjkoen01

    Dealership has no idea what’s wrong - Help!

    Check on Amazon for a Bluetooth battery monitor. It records your battery voltage and graphs it on your phone. You’ll be able to see if it is a slow discharge over time or if it is an intermittent load based on the voltage. You can also see if there is a voltage drop before the alarm goes off...
See more

Latest posts

Staff online

Members online

... and 4 more.
Total: 1,267 (members: 54, guests: 1,213)
Robots: 1,864

Forum statistics

Threads
195,627
Posts
2,872,726
Members
156,460
Latest member
blafer

Share this page

Top