Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.





I'm currently working on a build JL audio stealthbox with the 2 10TW1 because I need the load floor so I compromised. JL audio 6001 for subs 8008 for the rest BLAM 165RC for rear fill. Went higher end with BLAM 165 Multix in front. I'm hesitant to start because I want my hands free and sat radio to sound good and fear they won't with the rockford DR1 with maestro. Is the Mosconi a better solution? You run factory radio and are running premium gear. I hear external sources sound good, but factory sources don't. How is it in your truck?Factory Head unit, Mosconi 6to8 V8 DSP.
How well does your non-music sound come through ( park sensor tones, hands free phone and nav. Voice) also do you have sat. Radio and how does it sound. Mosconi DSP tapped into the alpine amp harness or something else getting signal and sending it to the mosconi?I wish you could hear it. I’ve had three different Rams from the basic head unit to the 8.4N alpine. I have always kept the factory head unit. This is my personal preference, With the proper equipment you can get excellent sound. I’ve had experts comment on how they couldn’t tell I was using the factory head unit. As long as you can get a good flat signal into your DSP then you’re good to go. The head unit is just used as a source to get my signal into the DSP that’s it. All of the tuning, volume, processing is done through the DSP. The mosconi piece was a better solution for me, very easy to use and setup.
All of the above comes through with no issues, I’m drawing my high input signal from the front and rear speakers. I just tapped into the speaker wires in each door, ran speaker wire back to the DSP and used speaker wire to rca adapters to connect.How well does your non-music sound come through ( park sensor tones, hands free phone and nav. Voice) also do you have sat. Radio and how does it sound. Mosconi DSP tapped into the alpine amp harness or something else getting signal and sending it to the mosconi?
Does my boat count for this thread?[/QUOTE
Sure
As long as you own a RAM I don’t careDoes my boat count for this thread?
As long as you own a RAM I don’t care
Hey now, I still own a Ram lolHahahaha I figured it was cool when we have pictures of a F150 in here.
I have a AVH-2330 I installed myself. I always Update me sound system..took me 3 years but I finally did it. Went from the 5" screen that kept on acting up. No Amp no speakers. But I maintained all functions of my steering wheel, OEM Sat Antennae and backup Camera.
It looks like you wandered onto the RAM forum...
It looks like you wandered onto the RAM forum...
It would appear so bigcheezIt looks like you wandered onto the RAM forum...
It would appear so bigcheez
Who made that box for you?View attachment 123312 View attachment 123313 View attachment 123314 Sorry if I’m stepping on someone else’s post. Looked way back but didn’t see one. I see a lot of great post about audio builds and projects but not one where we can showcase the work. Post all gens and pics View attachment 123309 View attachment 123310 I’ll start it off. Factory Head unit, Mosconi 6to8 V8 DSP, amps: Mosconi AS 200.4, Mosconi AS. 100.2, JL Audio HD 750/1. Speakers: Focal Utopia Be No7 3 way active set. JL Audio W7 12AE Sub.