What did you do with your 4th Gen this week?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jendsley06

Senior Member
Joined
Sep 22, 2018
Posts
160
Reaction score
126
Location
Southern Illinois
Ram Year
2018
Engine
Hemi 5.7
I replaced the trailer hitch plug that fell out of the bumper. Apparently they fall out easily after time. e9384296786e807cc78dd9780a8d72aa.jpg I ran a bead of clear caulk around the ring to help prevent it from falling out again. I thought about gluing it in, but the caulk will do a good job holding it in place and give me the option of removing it if I want to.

I also used my truck to pull out a couple of well established bushes in an elderly neighbors yard that he was trying to remove by hand. He was grateful for the help. It would have taken him a long time to do what took me a few minutes to do with the truck.


I know the voices in my head aren’t real, but man, do they ever come up with some great ideas.
Mine fell out before my first payment. I'm thinking it had help though. Used a little glue on mine though. Hasn't fallen out again. Lol
 

JB1

Senior Member
TOTM Winner
Joined
Nov 3, 2011
Posts
8,366
Reaction score
7,542
Location
Houston, Texas
Ram Year
2017
Engine
Hemi 5.7
You selling the mishimoto can?

Sure I'll sell it for $50, you may need to buy some new hose though because I had to cut about 1" off the ends to get it to come off.
 
Last edited:

Gator57

Senior Member
Joined
Feb 9, 2020
Posts
114
Reaction score
154
Location
Portland, TN
Ram Year
2014
Engine
5.7 Hemi
Sure I'll sell it for $50, you may need to buy some new hose though because I had to cut about 1" off the ends to get it to come off.
Where are you located? $50 flat or $50 plus shipping lol
 

renfrick1

Senior Member
Joined
Nov 9, 2018
Posts
111
Reaction score
105
Location
New Fairfield
Ram Year
2010
Engine
5.7
Had a buddy do exhaust manifolds on my ‘10 and replace the gasket on the rear shaft transfer case
It was a trade off of a $900
Get it back on Monday.


Sent from my iPhone using Tapatalk
 

Ramm5.7

Senior Member
Joined
Sep 23, 2017
Posts
5,322
Reaction score
7,365
Location
So Cal
Ram Year
2019 Ram 1500 Classic Bighorn
Engine
5.7 Hemi
Washed RAMmstein today, also swapped out the power window switch for a FULLY illuminated one (even the mirror directional and buttons :) )

Love that switch!! Sometimes Its the little things that are worth the most...lol
 

Ramm5.7

Senior Member
Joined
Sep 23, 2017
Posts
5,322
Reaction score
7,365
Location
So Cal
Ram Year
2019 Ram 1500 Classic Bighorn
Engine
5.7 Hemi
Its still light out so I dont even know if it works yet :)

I have faith though.

I did the same...too bright to enjoy at install. Took a pic and could barely see they were on
 

Gator57

Senior Member
Joined
Feb 9, 2020
Posts
114
Reaction score
154
Location
Portland, TN
Ram Year
2014
Engine
5.7 Hemi
Got tired of my dim and flickering interior lights. Bought some LED panels off amazon and made the swap. Holy moly it’s bright in here now! 257e3d39c071fbaf064727119c3a419a.jpg9972b5a343d4e42f9154115ac64c0701.jpg


Sent from my iPhone using Tapatalk

I did the same...too bright to enjoy at install. Took a pic and could barely see they were on
.


What led’s did y’all go with specifically? Mixed reviews on amazon are nearly impossible to decipher lol
 

bellaireroad

Senior Member
Joined
Dec 5, 2016
Posts
695
Reaction score
626
Location
Fort Worth
Ram Year
2017
Engine
Hemi 5.7
Got tired of my dim and flickering interior lights. Bought some LED panels off amazon and made the swap. Holy moly it’s bright in here now! 257e3d39c071fbaf064727119c3a419a.jpg9972b5a343d4e42f9154115ac64c0701.jpg


Sent from my iPhone using Tapatalk

Post a link to the ones you used please..... did you have to do any cutting or gluing?


Sent from my iPhone using Tapatalk Pro
 

Hbrichman

Senior Member
Joined
Jul 7, 2013
Posts
118
Reaction score
245
Location
Orange County, CA
Ram Year
2014
Engine
Hemi 5.7L

Hbrichman

Senior Member
Joined
Jul 7, 2013
Posts
118
Reaction score
245
Location
Orange County, CA
Ram Year
2014
Engine
Hemi 5.7L
Post a link to the ones you used please..... did you have to do any cutting or gluing?


Sent from my iPhone using Tapatalk Pro

Posted above. It was fairly straight forward. The only thing you need to cut are these little mushroom shaped tabs holding the chrome piece on so you can remove the old LED underneath. I've seen people glue it back where those tabs used to be, but mine sat pretty firmly so I didn't.
 

KiltedCelt01

Senior Member
Joined
Apr 9, 2017
Posts
327
Reaction score
550
Location
PA
Ram Year
2012
Engine
Hemi 5.7
I ordered a ported 87mm throttle body from Moe’s yesterday. ECT threw a code, voltage light was flashing and CEL came on while I was driving home. The truck was acting like it wanted to keep going when braking and the rpms would keep climbing at idle. I had an appointment for PA state inspection & emissions tomorrow morning, too. Figures.

Oh well, here’s to watching the mailbox for the next couple of days. 9f6787474441c41d925c2bb7afb8e243.jpg


Sent from my iPhone using Tapatalk
 

Addicted2fishing

Senior Member
Joined
Jul 2, 2017
Posts
3,077
Reaction score
2,821
Location
Durham region
Ram Year
2017
Engine
HEMI 5.7
Used mine to get a bunch of paint today. Yippie!


Tiped on ifone using Tapatalk and auto correct. Can’t you tell?
 

Forum statistics

Threads
213,354
Posts
3,092,143
Members
174,575
Latest member
DITRIO
Back
Top