Bed lighting & Plug

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Digi

Member
Joined
Dec 12, 2019
Posts
37
Reaction score
23
Location
central us
Ram Year
2014 Laramie
Engine
5.7 Hemi
Is it possible to pull power from the 4 pin wiring in the truck bed to power some led lighting for the bed and a receptacle as well? I already have the larger pin connection in the bumper for trailer. Previous owner I think had a topper with lights and connected to the 4 pin, just trying to find a way to make it useful again.

Thanks.
 

Lashlee

Junior Member
Joined
Jan 2, 2026
Posts
9
Reaction score
15
Location
Knoxville, TN
Ram Year
2018
Engine
5.7
It really depends on what your plan on is for the "receptacle" (typically LED lighting will draw very little power, so it shouldn't be an issue). The limit will be based on the wire size/fuse rating that Ram used. In some cases, the 4 pin and the 7 pin share power so you might over tax the system if you are both towing and have the bed items being powered.
 
OP
OP
D

Digi

Member
Joined
Dec 12, 2019
Posts
37
Reaction score
23
Location
central us
Ram Year
2014 Laramie
Engine
5.7 Hemi
Good to know, thanks, I'll have to take a look at the fuse setup for my ram and see. I know the led are minimal and only would be used randomly when I need to seeing the back or when dark. The receptacle is more of a want then need, random uses I might have a need for it. I'll have to double check and see what ram did with the 4 pin and 7 pin setup.
 

Forum statistics

Threads
213,354
Posts
3,092,143
Members
174,575
Latest member
DITRIO
Back
Top