Search results

  1. P

    Upper Control Arms

    Nice! Thanks for all the info!
  2. P

    Upper Control Arms

    For sure! Just don’t wanna break the bank for something that I thought I wouldn’t need. I don’t off-road either, just saw those are good options.
  3. P

    Upper Control Arms

    Trying to decide between Zone Offroad and Freedom Offroad
  4. P

    Upper Control Arms

    They are set to 2.1. And the ball joint itself is grinding. From what ive seen the angle is just too much. Ive looked at the ball joint and its exposed and really bad. I just want something durable that will last. It wasnt too long after the leveling kit that the ball joint was shot.
  5. P

    Upper Control Arms

    Thank you!
  6. P

    Upper Control Arms

    Bump
  7. P

    Upper Control Arms

    Need some advice. I put the Bilstein leveling kit on my 2014 1500 Sport and now my UCA are shot. They are grinding and sound horrible. I didn’t think it was a problem or was told it wouldnt be with the leveling kit, but apparently the 2014 UCA are different and don’t like the angles I’ve been...
  8. P

    Urgent Advice Needed. Limp Mode...

    Yeah, sadly I learned the hard way after buying multiple napa sensors lol. Luckily its fixed now and its out of limp mode, plus the belt replaced. Now to figure out the compression issue of a possible bent valve.
  9. P

    Urgent Advice Needed. Limp Mode...

    Sensors changed and good now. Still have to check compression for possible bent valve, but just learned my oem belt size is too big for my aftermarket alternator so issues should be fixed soon
  10. P

    Urgent Advice Needed. Limp Mode...

    I just put new sensors from mopar on and it fixed the issues! Just learned from alternator manufacturer i need a 1/2 in smaller belt because of after market part having a smaller pulley
  11. P

    Urgent Advice Needed. Limp Mode...

    Update, I got new OEM sensors today and that seems to have fixed the limp mode issue. Havent done compression yet as I realized after switching them out that my alternator is taking a crap on me! So im thinking that might be my sluggish issues
  12. P

    Urgent Advice Needed. Limp Mode...

    And I appreciate it. I believe some are saying that there could be two issues. I think the P0344 code could be because I have napa sensors and not Mopar, which I will be ordering. However, i might also have a compression problem caused by the bent valve from wrong timing, so both are issues...
  13. P

    Urgent Advice Needed. Limp Mode...

    lol ok
  14. P

    Ground Straps

    They are nice bikes! Cant wait to get a harley again!
  15. P

    Ground Straps

    So i do have aftermarket cam/crank sensors installed from napa. I have been told to try the Mopar sensors, but I was also told that i might have bent a valve, or multiple, because when I first replaced my cam i messed up the timing and possibly bent them. Doing a compression test today to fully...
  16. P

    Urgent Advice Needed. Limp Mode...

    Im only doing it my way because I havent done a compression test before so I dont exactly know what to listen for. I would rather use the gauge and get numbers to compare so i know for sure. Numbers read better to me than possibly tearing my truck apart when i dont know the exact sound. Thanks...
  17. P

    Urgent Advice Needed. Limp Mode...

    Battery load test was good, so not that electrical issue. I checked all the wiring and all the sensors. Everything is plugged in and good. Im gonna check continuity in the wires at the cam sensor next as well as the compression test. I started it for the battery test and was feeling it while it...
  18. P

    Urgent Advice Needed. Limp Mode...

    I’m just gonna get a compression tester lol. Thanks tho
  19. P

    Urgent Advice Needed. Limp Mode...

    Thanks. Does compression vary between each truck, or should I be looking for a baseline number? Obviously is all are the same except for one ill know, but just curious.
  20. P

    Urgent Advice Needed. Limp Mode...

    Thanks, im leaning towards a bent valve and Im gonna load test my battery because i messed up timing once, so that probably bent my valve(s). but imma check battery to ensure it hasnt gone bad at all. Thanks for the input as I will keep it in mind if something doesnt go as planned!
  21. P

    Urgent Advice Needed. Limp Mode...

    How would I know it it is an exhaust or intake valve?
  22. P

    Urgent Advice Needed. Limp Mode...

    I dont even know what you are talking about? explain some more lol
  23. P

    Urgent Advice Needed. Limp Mode...

    Yes and no. I have aftermarket exhaust on it so I thought it was just the new cam making it sound louder, but now that i think back over it the exhaust sounds a little too aggressive, maybe like a diesel, maybe..and the truck when driving at higher speeds like 85ish is a little rough, but my...
  24. P

    Urgent Advice Needed. Limp Mode...

    I used napa sensors as I was told those sensors are the closest and best thing to Mopar.
  25. P

    Ground Straps

    P0344

Latest posts

Staff online

Members online

... and 103 more.
Total: 1,695 (members: 153, guests: 1,542)
Robots: 1,780

Forum statistics

Threads
195,707
Posts
2,873,581
Members
156,588
Latest member
Indio1969

Share this page

Top