Search results

  1. N

    Radiator Compatibility

    So, I got part of my answer when I measured my radiator. Not 100% sure if it would work or not. Dimensions of the current radiator: Core Thickness: 1.5" (1 1/2 inches) Core Width: 24" Core Height: 20" The radiator I am looking at: Core Thickness: 1.57" Core Width: 24.09" Core Height: 18.43"...
  2. N

    Radiator Compatibility

    Hi everyone, long time lurker, rare poster. I have recently acquired a 2007 Rom 1500 SLT, 5.7L Hemi with the tow package, and discovered on it's 1000 mile trip home that it needs a radiator. I know the job is not difficult to do as I did the one in my 03 1500 when I had it. However, since there...
  3. N

    Mileage on your 3rd Gen.?

    I have taken ownership of an 07 Ram 1500 SLT QC, 5.7L that currently has 47,895 miles. When my father purchased it, the FL title shows 45,000, and he only put about 1,100 on it in two years. I put nearly that much on lit bringing it home to KY. LOL.
  4. N

    Differential Swap

    I apologize for any confusion. Yes, I meant the whole rear end assembly, housing and all, not just the carrier. And I can't do the change here at my apartment anyway as it's against the rules. It sucks, but I do understand the reasoning for the rule as well as I am sure the work would take at...
  5. N

    Differential Swap

    Thanks bul. I appreciate the info.
  6. N

    Differential Swap

    Thanks for the reply, Hemi. Would an older rear end be the same, say out of a 2000 or 2001? Also, if I went with the 3.92, am I correct in presuming that a speedo calibration would be needed?
  7. N

    Differential Swap

    Complete Rear End Swap Hello everyone, My 03 Ram 1500 QC 2WD has a whine from the rear end. It has had this since I bought it and now I am looking to replace the differential. According to my build sheet, it had the 9.25 Corporate LD diff, 3:55 ratio. I haven't the tools or the place as I live...
  8. N

    Motorcycle owners club

    I have an 09 Yamaha FZ1 and an 01 Honda CBR 600 F4i.
  9. N

    Gun Club

    I own a Taurus PT111 Millenium G2 (9mm) and a S&W AR-15 Sport (.223/5.56).
  10. N

    HELP, LAMP OUT warning driving me nuts.

    I've had my 03 1500 QC for almost a month. My "lamp out" warning did that the first good rain we had after I purchased it. First time it did it I thought it was the brake switch at the pedal as it would only do it when I pressed the brake pedal and would quit when I let off. However, it did that...
  11. N

    Stock hitch bolts

    Ok. Got the 37084 Reese hitch from UPS today. It fits. However, with the Reese hitch there is no fishing wire, so I had to make my own using safety wire. There are supposed to be six bolts to hold this on. If I use the two on the bottom of the bumper tube before putting the ones in on the back...
  12. N

    I can't figure this out

    If it were a 2.2L Mopar I'd be guessing hall effect pickup (would be part of the distributor but I don't think RAM's have hall effect pickups). Not sure of the electronics on a 4.7L. Just throwing this out: speed sensor, Automatic Shut Down relay? I'm not too up to date on all the electronics...
  13. N

    Stock hitch bolts

    Hey Red, I notice that's a Ducati hitch plug there. You have a Duc? (I know, off topic. hehehe)
  14. N

    Stock hitch bolts

    Ok, time for an update. I actually ordered a Reese hitch through Advance Auto, part number 33072. Now, the online Rep for Advance could not tell me the difference, or if it was for a truck made before or after 11/02. I ordered it with the understanding that if it did not fit I could return it...
  15. N

    Stock hitch bolts

    I talked to Curt Mfg Tech support. They make the 13333 for 1500's made after 11/02, and 13326 for 1500's built before 11/02. I asked what the difference was between the two, other than the latter having four holes along the back instead of two, and the 100/1000 lb rating increase to the former...
  16. N

    Stock hitch bolts

    Sorry to dig up an old thread, but I guess it's better than starting a new one. Is that hitch you linked to the same as a Curt 13333? It appears that is what was pictured. I have an 03 1500 QC 5.9L 2WD without the hitch but the cross member is there and it looks like that would bolt up with no...

Latest posts

Members online

Total: 396 (members: 9, guests: 387)
Robots: 1,205

Forum statistics

Threads
195,624
Posts
2,872,661
Members
156,454
Latest member
Goodie1990

Share this page

Top